| 精益造船中计划约束下的拉动式生产控制方法 |
| |
| 引用本文： | 宗鸣镝,孙厚芳.精益造船中计划约束下的拉动式生产控制方法[J].辽宁石油化工大学学报,2012(2):78-83. |
| |
| 作者姓名： | 宗鸣镝 孙厚芳 |
| |
| 作者单位： | 北京理工大学机械与车辆工程学院 |
| |
| 基金项目： | 国防科工局技术基础资助项目(C172009C001) |
| |
| 摘 要： | 分析了传统"拉动式"生产控制方法在造船行业应用的问题,针对造船行业项目性管理的特点,提出了"项目计划约束下的拉动式控制方法"。该方法基于企业产能具备自我调节能力的前提下,通过"强制投产"原则与看板(KANBAN)控制原理的结合,达到在制品数量控制与项目进度控制的平衡。最后,通过计算机仿真对本文的控制方法与KANBAN式生产控制方法和推动式生产控制方法进行了对比分析。
|
| 关 键 词： | 精益生产 造船 拉动式生产 项目进度控制 |
A Pull-Way Production Control Method With Restriction of Plan for Lean Shipbuilding |
| |
| ZONG Ming-di,SUN Hou-fang.A Pull-Way Production Control Method With Restriction of Plan for Lean Shipbuilding[J].Journal of Liaoning University of Petroleum & Chemical Technology,2012(2):78-83. |
| |
| Authors: | ZONG Ming-di SUN Hou-fang |
| |
| Affiliation: | (School of Mechanical and Automobile Engineer,Beijing Institute of Technology,Beijing 100081,P.R.China)Received 10 December 2011;revised 5 March 2012;accepted 15 March 2012 |
| |
| Abstract: | The issues of utilizing the traditional "pull-way" production control method for shipbuilding were investigated.Considering the project management character at shipbuilding,a pull-way production control method with restriction of project plan was raised.This method assumes the production capacity of the enterprise can be self-adjusted based on the progress.A "mandatory production command" controlling principle was introduced into the KANBAN control process,which can balance the WIP control and the project progress control target.The result of a computer simulation program was introduced at the end of the paper,which compared the result of the suggested control method with that of KANBAN control method and push production control method. |
| |
| Keywords: | Lean manufacturing Shipbuilding Pull-way production Project progress control |
| 本文献已被 CNKI 等数据库收录！ |
