| 考虑因子交互作用多目标优化注塑模冷却系统工艺参数 |
| |
| 引用本文： | 舒茂盛;兰箭;毛华杰;尹飞. 考虑因子交互作用多目标优化注塑模冷却系统工艺参数[J]. 中国塑料, 2011, 25(6): 65-69. DOI: 10.19491/j.issn.1001-9278.2011.06.013 |
| |
| 作者姓名： | 舒茂盛 兰箭 毛华杰 尹飞 |
| |
| 作者单位： | 武汉理工大学材料科学与工程学院 |
| |
| 摘 要： | 运用部分因子实验设计方法从众多的实验因子中初步筛选出与注塑模冷却系统密切相关的若干个独立因子和交互因子。在考虑交互因子的基础上，结合Taguchi试验设计和模糊数学中的综合评判法，对成型周期和冷却结束时型腔温度差2个目标值进行综合评判，得到综合评分；通过对综合评分进行极差分析，确定了各工艺参数对综合评分的影响程度，从而获得了优化的工艺参数组合。
|
| 关 键 词： | 冷却系统 析因分析 Taguchi试验设计 综合评判法 |
| 收稿时间： | 2010-12-30 |
Multi-objective Optimization Design of Processing Parameters of Injection Molding Cooling System Considering the Interactions |
| |
| SHU Maosheng,LAN Jian,MAO Huajie,YIN Fei. Multi-objective Optimization Design of Processing Parameters of Injection Molding Cooling System Considering the Interactions[J]. China Plastics, 2011, 25(6): 65-69. DOI: 10.19491/j.issn.1001-9278.2011.06.013 |
| |
| Authors: | SHU Maosheng LAN Jian MAO Huajie YIN Fei |
| |
| Affiliation: | SHU Maosheng,LAN Jian,MAO Huajie,YIN Fei(School of Materials Science and Engineering,Wuhan University of Technology,Wuhan 430070,China) |
| |
| Abstract: | A fractional factorial experiment was employed to screen out significantly independent and interactive factors among numerous processing parameters that are closely related to injection molding cooling system.And,regarding the interaction effect,the cycling time and cavity temperature difference at the end of cooling were taken as the optimization objectives to evaluate their contributions using Taguchi experiment design method as well as with fuzzy comprehensive judgment method.Through an analysis of the e... |
| |
| Keywords: | injection molding cooling system processing parameter multi-objective optimization Taguchi experiment design interaction |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国塑料》浏览原始摘要信息 |
|
点击此处可从《中国塑料》下载全文 |
