首页 | 本学科首页   官方微博 | 高级检索  
     

江苏电网电力系统稳定器参数辨识研究
引用本文:王晓伟,蒋平,高磊,徐珂.江苏电网电力系统稳定器参数辨识研究[J].江苏电机工程,2007,26(2):13-15.
作者姓名:王晓伟  蒋平  高磊  徐珂
作者单位:1. 东南大学电气工程学院,江苏,南京,210096
2. 江苏省电力试验研究院有限公司,江苏,南京,210036
摘    要:提出了一种基于遗传算法(GA)的将电力系统稳定器(PSS)原模型转换为仿真软件下标准模型的参数辨识方法,通过建立PSS原模型和标准模型传递函数结构框图,输入扰动信号,以原模型和标准模型的输出误差最小作为辨识目标,利用GA对标准模型参数进行优化调整,最终得到满足要求的PSS标准模型参数。该方法简便易行,精度高,实际PSS参数辨识结果表明,该方法具有很好的效果。

关 键 词:电力系统稳定器  参数辨识  遗传算法  原模型  标准模型
文章编号:1009-0665(2007)02-0013-03
收稿时间:2006-11-18
修稿时间:2006-11-18

Research on Parameter Identification of Power System Stabilizer in Jiangsu Power Grid
WANG Xiao-wei,JIANG Ping,GAO Lei,XU Ke.Research on Parameter Identification of Power System Stabilizer in Jiangsu Power Grid[J].Jiangsu Electrical Engineering,2007,26(2):13-15.
Authors:WANG Xiao-wei  JIANG Ping  GAO Lei  XU Ke
Affiliation:1.Southeast University, Nanjing 210096, China; 2.Jiangsu Electric Power Research Institute Co.,Ltd. ,Nanjing 210036, China
Abstract:A new method based on genetic algorithm for identifying parameters of the power system stabilizer is introduced in this paper.This method is used to convert the original model of the power system stabilizer to the standard model of the power system stabilizer.By building transfer function structure of the original model and the standard model,with the minimal difference between the output of the original model and the standard model as the goal,the parameters of the standard models are adjusted constantly with genetic algorithm.Finally,the most suitable parameters of the standard model of power system stabilizer can be obtained.The actual identification result shows that this method is able to obtain the accurate parameters of the standard model of power system stabilizer.
Keywords:power system stabilizer  parameter identification  genetic algorithm  original model  standard model
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号