| 等离子弧焊直接金属成形技术的工艺研究 |
| |
| 引用本文： | 胡晓冬 赵万华. 等离子弧焊直接金属成形技术的工艺研究[J]. 机械科学与技术, 2005, 24(5): 540-542 |
| |
| 作者姓名： | 胡晓冬 赵万华 |
| |
| 作者单位： | [1]浙江工业大学机电学院，杭州310014 [2]西安交通大学，西安710049 |
| |
| 基金项目： | 全国优秀博士学位论文项目(200026)资助 |
| |
| 摘 要： | 提出了一种基于等离子弧焊的直接金属成形新方法,通过对成形工艺的试验研究,确定了焊接电流、成形速度与成形轨迹宽度之间的对应关系;针对成形轮廓的表面质量问题,实施了根据轮廓矢量进行切向送丝的填充方案;并采用循环水冷的温控措施解决了成形过程的过热问题。
|
| 关 键 词： | 快速成形 直接金属成形 弧焊 |
| 文章编号： | 1003-8728(2005)05-0540-03 |
Process Reasearch for Direct Metal Forming Based on Plasma Arc Welding |
| |
| Abstract: | Direct metal forming based on plasma arc welding is a novel rapid prototyping process. Relationship among welding bead width, welding current and speed was obtained through process experiments. Furthermore, an adaptive wire feeding manner which can adjust the feeding direction relative to the track tangent is introduced to improve the bead quality. A water cooling method was also developed to control the heat accumulation during forming. |
| |
| Keywords: | Rapid prototyping Direct metal forming Arc welding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
