| 基于标准为约束的参数化设计 |
| |
| 引用本文： | 范志刚,陈宇平,吴明,张钰.基于标准为约束的参数化设计[J].电子机械工程,2005,21(5):12-14,18. |
| |
| 作者姓名： | 范志刚 陈宇平 吴明 张钰 |
| |
| 作者单位： | 国电自动化研究院,江苏,南京,210032;国电自动化研究院,江苏,南京,210032;国电自动化研究院,江苏,南京,210032;国电自动化研究院,江苏,南京,210032 |
| |
| 摘 要： | 标准中有大量的设计知识,将标准与通用的参数化设计方法结合起来可以更有效地再利用设计知识.介绍以标准作为约束进行参数化设计方法,并结合机柜实例介绍了使用Pro/ENGINEER以标准为约束的参数化设计过程.
|
| 关 键 词： | 标准 约束 参数化设计 机柜 Pro/ENGINEER |
| 文章编号： | 1008-5300（2005）05-0012-03 |
| 收稿时间： | 2005-06-25 |
| 修稿时间： | 2005-06-25 |
Parametric Design Based on Constraints of Standards |
| |
| FAN Zhi-gang,CHEN Yu-ping,WU Ming and ZHANG Yu.Parametric Design Based on Constraints of Standards[J].Electro-Mechanical Engineering,2005,21(5):12-14,18. |
| |
| Authors: | FAN Zhi-gang CHEN Yu-ping WU Ming and ZHANG Yu |
| |
| Affiliation: | Nanjing Automation Research Institute, Nanjing 210013, China |
| |
| Abstract: | There is a lot of design knowledge in standards. The general parametric design combined with standards makes design knowledge reusing more efficiently. This paper briefly introduces parametric design with constraints of standards. Based on the constraints of standards, parametric design process of a cabinet using Pro/ENGINEER is also given. |
| |
| Keywords: | Pro/ENGINEER |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《电子机械工程》浏览原始摘要信息 |
|
点击此处可从《电子机械工程》下载全文 |
|
