| 水力式集矿机构注水软管变形阻力矩分析 |
| |
| 引用本文： | 李俊. 水力式集矿机构注水软管变形阻力矩分析[J]. 矿冶工程, 2019, 39(6): 5-9. DOI: 10.3969/j.issn.0253-6099.2019.06.002 |
| |
| 作者姓名： | 李俊 |
| |
| 作者单位： | 深海矿产资源开发利用技术国家重点实验室,湖南 长沙410012 |
| |
| 基金项目： | 中国大洋协会国际海域资源调查与开发“十二五”课题(DY125-14-T-03);十三五国家重点研发计划子课题(2016YFC0304102-2) |
| |
| 摘 要： | 基于液体压缩体积模量和二重直梁简化模型对多金属结核水力式集矿机构中连接水泵和集矿头的软管变形阻力矩进行了力学分析, 提出了变形阻力矩计算方法, 给出了变形阻力矩和集矿头纵向位移的幂函数关系。结果表明, 在纵向位移0.5 m时, 3根软管的变形阻力矩为31 462 N·m。计算方法已成功应用于集矿机试验。
|
| 关 键 词： | 水力式集矿机 深海采矿 集矿机构 注水软管 变形阻力矩 |
| 收稿时间： | 2019-05-29 |
Analysis of Deformation Resistance Moment of Water Hose in Hydraulic Collector Mechanism |
| |
| LI Jun. Analysis of Deformation Resistance Moment of Water Hose in Hydraulic Collector Mechanism[J]. Mining and Metallurgical Engineering, 2019, 39(6): 5-9. DOI: 10.3969/j.issn.0253-6099.2019.06.002 |
| |
| Authors: | LI Jun |
| |
| Affiliation: | State Key Laboratory of Deep Sea Mineral Resources Development and Utilization Technology, Changsha 410012, Hunan, China |
| |
| Abstract: | Based on the bulk modulus of fluid and a simplified model with dual beams, mechanical analysis was performed for the deformation resistance moment of water hose that connects water pump and collector in hydraulic collector mechanism for polymetallic nodules mining. And then a method for calculating the deformation resistance moment of the hose is proposed, by which a power function between deformation resistance moment and vertical displacement of collector head is obtained. The results reveal that the deformation resistance moment of three hoses is 31 462 N·m when the longitudinal displacement is 0.5 m. This calculation method has been successfully applied in the following collector test. |
| |
| Keywords: | hydraulic collector deep-sea mining collector equipment water hose deformation resistance moment |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《矿冶工程》浏览原始摘要信息 |
|
点击此处可从《矿冶工程》下载全文 |
