首页 | 本学科首页   官方微博 | 高级检索  
     

Monel400合金/16MnR基体堆焊工艺分析
引用本文:刘志颖,余巍,张浩,王岗.Monel400合金/16MnR基体堆焊工艺分析[J].焊接学报,2009,30(8):57-60.
作者姓名:刘志颖  余巍  张浩  王岗
作者单位:洛阳船舶材料研究所,河南,洛阳,471039
基金项目:洛阳船舶材料研究所新产品基金资助项目(H0708-08)
摘    要:采用ERNiCu—7镍基合金焊丝直接在16MnR表面堆焊Monel400合金.分别对钨极气体保护焊(GTAW)和熔化极气体保护焊(GMAW)及其二者组合施焊的堆焊层不同厚度处的化学成分进行分析比较,探讨了焊接过程中异种金属材料之间基本元素的相互稀释及其扩散的趋势和程度,分析了堆焊界面弯曲性能、宏观及微观组织.结果表明,GTAW+脉冲GMAW的组合方法焊接,堆焊层厚度大于2.5mm时,影响堆焊层腐蚀性能的Fe,Ni,Cu等主要元素就能达到ERNiCu—7合金焊丝的标称合金成分要求;侧弯性能测试结果良好;焊接工艺性好,质量稳定可靠,生产效率高.

关 键 词:蒙乃尔400  堆焊  稀释  容器  
收稿时间:2008/6/13 0:00:00

Technique analysis of surfacing 16MnR steel with Mone1400 alloy
LIU Zhiying,YU Wei,ZHANG Hao and WANG Gang.Technique analysis of surfacing 16MnR steel with Mone1400 alloy[J].Transactions of The China Welding Institution,2009,30(8):57-60.
Authors:LIU Zhiying  YU Wei  ZHANG Hao and WANG Gang
Affiliation:Luoyang Ship Material Research Institute;Luoyang 471039;China
Abstract:Mone1400 alloy was surfaced on 16MnR steel with ERNiCu-7 nickel-base alloy welding wire.Chemical composition of different thickness for surfacing layer by gas tungsten arc welding(GTAW),gas metal arc welding(GMAW)and welding combined GTAW with GMAW was analyzed.The diffusion and dilution of basic elements in different metal materials were researched,and bending performance,macrostructure and microstructure of interface were studied.The results show that erosion resistant performance of surfacing layer is ex...
Keywords:Mone1400  surfacing  dilution  vessel  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号