Kinematic and geometric error compensation of a coordinate measuring machine |
| |
Authors: | N. A. Barakat M. A. Elbestawi A. D. Spence |
| |
Affiliation: | Intelligent Machines and Manufacturing Research Center (IMMRC), Department of Mechanical Engineering, McMaster University, Hamilton, Ontario, Canada L8S 4L7 |
| |
Abstract: | In this paper, kinematic modelling of a Coordinate Measuring Machine (CMM) is carried out and the methodology followed in modelling is explained in detail. The model is simplified by certain assumptions which may result in over-simplification of the model. Consequently, the model is investigated and enhanced by adding the relevant and suitable geometric error terms. Different approaches are employed to evaluate the model coefficients. In the first approach, a commercial ring gauge is measured in a structured lattice in the work volume of the CMM. Resulting errors in these measurements are used in conjunction with some statistical methods to arrive at sets of model coefficients values. The second approach is based on measurement of the individual 21 error terms in the CMM by means of laser interferometry. These measurements are used to evaluate another set of model coefficients. A compensation strategy is proposed and tested using the model and the sets of coefficients obtained. Volumetric Performance of the CMM is evaluated according to ASME standards, before and after compensation. Improvement in the CMM volumetric performance is demonstrated and compared. |
| |
Keywords: | Coordinate measuring machine Kinematic errors Geometric errors Error compensation |
本文献已被 ScienceDirect 等数据库收录! |
|