| 辊压成型中起皱影响因素分析 |
| |
| 引用本文： | 袁小会,廖义德,蔡逸飞. 辊压成型中起皱影响因素分析[J]. 机械工程师, 2006, 0(7): 123-124 |
| |
| 作者姓名： | 袁小会 廖义德 蔡逸飞 |
| |
| 作者单位： | 武汉化工学院,机械工程学院,武汉,430074 |
| |
| 摘 要： | 文中针对金属板料辊压成型工艺,采用Dynaform软件分析了成型角度、板料厚度及边缘宽度等因素对成型过程中出现的起皱的影响,其结果对设计和生产具有指导意义。
|
| 关 键 词： | 辊压成型 起皱 缺陷 影响因素 |
| 文章编号： | 1002-2333(2006)07-0123-02 |
| 收稿时间： | 2006-02-15 |
| 修稿时间： | 2006-02-15 |
Analysis of Influence Factors on Wrinkle in the Field of Roll Forming |
| |
| YUAN Xiao-hui,LIAO Yi-de,CAI Yi-fei. Analysis of Influence Factors on Wrinkle in the Field of Roll Forming[J]. Mechanical Engineer, 2006, 0(7): 123-124 |
| |
| Authors: | YUAN Xiao-hui LIAO Yi-de CAI Yi-fei |
| |
| Affiliation: | School of Mechanical Engineering,Wuhan Institute of Chemical Technology,Wuhan 430074,China |
| |
| Abstract: | The influences of forming angle, thickness of the panel and the width of the edge on the wrinkle have been discussed with Dynaform. The results offer some references to design and production. |
| |
| Keywords: | Dynaform |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
