| 基于网格法的数控加工仿真铣削参数优化研究 |
| |
| 引用本文： | 马登良. 基于网格法的数控加工仿真铣削参数优化研究[J]. 机床与液压, 2007, 35(12): 77-79,113 |
| |
| 作者姓名： | 马登良 |
| |
| 作者单位： | 淄博职业学院,山东淄博,255013 |
| |
| 摘 要： | 建立了铣削参数的多目标优化模型,运用网格法对铣削参数进行优化研究.采用Visual Basic 6.0 编程,并在仿真系统中进行实例验证,获得了优化的铣削用量组合.
|
| 关 键 词： | 网格法 数控加工 目标函数 铣削参数 |
| 文章编号： | 1001-3881（2007）12-077-3 |
| 收稿时间： | 2007-01-08 |
| 修稿时间： | 2007-01-08 |
Study on Parameters Optimization of Numerical Control Simulation Milling Based on Grid Method |
| |
| MA Dengliang. Study on Parameters Optimization of Numerical Control Simulation Milling Based on Grid Method[J]. Machine Tool & Hydraulics, 2007, 35(12): 77-79,113 |
| |
| Authors: | MA Dengliang |
| |
| Abstract: | The multi-objective optimization model of milling parameters was established, the milling parameters were optimized based on grid method. To program with Visual Basic 6.0, the optimized milling parameters were obtained, and the result was verified by a simulated example. |
| |
| Keywords: | Grid method NC machining Goal function Milling parameter |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
