首页 | 本学科首页   官方微博 | 高级检索  
     

添加氧化钛对钇铝石榴石纤维形貌的影响
引用本文:谭宏斌,马小玲,李春玲,冯小明,韩文松,杨小明.添加氧化钛对钇铝石榴石纤维形貌的影响[J].有色金属(冶炼部分),2013(5):51-53.
作者姓名:谭宏斌  马小玲  李春玲  冯小明  韩文松  杨小明
作者单位:1. 陕西理工学院材料学院,陕西汉中,723003
2. 陕西理工学院数计学院,陕西汉中,723003
基金项目:陕西省教育厅基金资助项目(12JK0437)
摘    要:以金属铝粉、氯化铝、冰醋酸、氧化钇为原料,通过溶胶—凝胶法制备了钇铝石榴石纤维(YAG)。通过在溶胶中引入氧化钛,研究其对YAG纤维形貌的影响。结果表明,氧化钛可促进YAG晶粒生长,含氧化钛的纤维在1 400℃烧结6h后,晶粒尺寸达0.5~1.0μm。

关 键 词:氧化钛  钇铝石榴石  纤维  形貌
收稿时间:2012/11/8 0:00:00
修稿时间:2012/11/18 0:00:00

Effect of Titania Addition on Microstructure of Yttrium Aluminum Garnet Fiber
Tan Hongbin,Ma Xiaoling,LI Chun-ling,FENG Xiao-ming,HAN Wen-song and YANG Xiao-ming.Effect of Titania Addition on Microstructure of Yttrium Aluminum Garnet Fiber[J].Nonferrous Metals(Extractive Metallurgy),2013(5):51-53.
Authors:Tan Hongbin  Ma Xiaoling  LI Chun-ling  FENG Xiao-ming  HAN Wen-song and YANG Xiao-ming
Affiliation:Shaanxi University of Technology
Abstract:Yttrium aluminum garnet(YAG) fibers were prepared by sol-gel method with aluminum powder,aluminum chloride,acetic acid and yttrium oxide as raw materials.The effects of titania on YAG fiber morphology were studied by adding titania into sol.The results indicate that the grain growth of YAG is promoted.The grain size of YAG fibers with titania is about 0.5~1.0 μm when the fiber is sintered at 1 400℃ for 6h.
Keywords:titania  yttrium aluminum garnet(YAG)  fiber  microstructure
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《有色金属(冶炼部分)》浏览原始摘要信息
点击此处可从《有色金属(冶炼部分)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号