首页 | 本学科首页   官方微博 | 高级检索  
     

轧后冷速对X100管线钢组织和力学性能的影响
引用本文:阮红志,赵爱民,赵征志,齐亮. 轧后冷速对X100管线钢组织和力学性能的影响[J]. 机械工程材料, 2012, 0(7): 93-95
作者姓名:阮红志  赵爱民  赵征志  齐亮
作者单位:北京科技大学冶金工程研究院
基金项目:国家“十一五”科技支撑计划项目(2006BAE03A06)
摘    要:通过热模拟试验机、光学显微镜对X100管线钢在连续冷却转变下的显微组织进行了研究,然后对其进行热轧,研究了轧后冷速对试验钢组织和力学性能的影响。结果表明:随冷速增大,试验钢组织中依次出现多边形铁素体、粒状贝氏体和贝氏体铁素体;当轧后冷速为20~42℃·s-1时,试验钢可获得由粒状贝氏体和贝氏体铁素体组成的组织以及良好的力学性能。

关 键 词:X100管线钢  热轧  显微组织  力学性能

Effect of Cooling Rate Following Rolling on Microstructure and Mechanical Properties of X100 Pipeline Steel
RUAN Hong-zhi,ZHAO Ai-min,ZHAO Zheng-zhi,QI Liang. Effect of Cooling Rate Following Rolling on Microstructure and Mechanical Properties of X100 Pipeline Steel[J]. Materials For Mechanical Engineering, 2012, 0(7): 93-95
Authors:RUAN Hong-zhi  ZHAO Ai-min  ZHAO Zheng-zhi  QI Liang
Affiliation:(Engineering Research Institute,University of Science and Technology Beijing,Beijing 100083,China)
Abstract:The microstructure of X100 pipe steel during continuous cooling transformation was studied by thermal simulation testing and optical microscopy,and then the tested steel was hot rolled and the effects of different cooling rates following rolling on microstructure and mechanical properties of the tested steel were studied.The results show that the microstructure changed from polygonal ferrite,granular bainite to bainitic ferrite with the increase of cooling rate.The microstructure comprised by granular bainite and bainitic ferrite and excellent mechanical properties were obtained when the cooling rate was 20-42 ℃·s-1.
Keywords:X100 pipeline steel  hot rolling  microstructure  mechanical property
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号