Variation in mechanical properties of natural and recycled aggregate concrete as related to the strength of their binding mortar

Experimental work was performed to study the effect of binding mortar strength on the mechanical properties of recycled natural aggregate concrete mixes as well as reference corresponding natural aggregate concrete mixes. The moduli of elasticity of both NAC and RAC were found to be higher than that of corresponding mortar by about 40% and 10% respectively, for all compressive strengths investigated. It was possible to reach compressive strength for RAC of 53.5 MPa. The ratios of compressive strength of NAC or RAC to that of mortar varied between (1.05–1.56) and (1.02–1.26) respectively, these ratios decreased with the increase in compressive strength. Also from the results of compressive strength, it was found that the ratios cylinder/cube compressive strengths of RAC and mortar were smaller than those of NAC. The ranges of values obtained were (0.71–0.84) and (0.69–0.75) for RAC and mortar respectively, while for NAC this ratio ranged between (0.81–0.92), these values were obtained for compressive strengths ranging between 15 to 55 MPa. It was found that it is better to relate the cylinder/cube strength ratio to the modulus of elasticity of the concrete or mortar rather than to its compressive strength. The flexural strength showed an opposite trend, the ratios of NAC and RAC to that of mortar ranged between (0.72–0.95)% and (0.61–0.80)% respectively. These ratios increased with the decrease in compressive strength of mortars. On the other hand, the splitting tensile strength of NAC was higher than that of RAC and mortar for all strength levels investigated. The ratio of NAC to mortar splitting tensile strength ranged between (1.13–1.69), while this ratio for RAC ranged between (0.87–1.36). Finally, several regressions were developed that can relate the mechanical properties of the three materials investigated.