| 口模直径对PP/硅藻土复合材料流动性的影响 |
| |
| 引用本文： | 梁基照,朱志华.口模直径对PP/硅藻土复合材料流动性的影响[J].合成树脂及塑料,2007,24(1):43-46. |
| |
| 作者姓名： | 梁基照 朱志华 |
| |
| 作者单位： | 华南理工大学工业装备与控制工程学院,广东,广州,510640 |
| |
| 摘 要： | 熔体体积流动速率(MVR)是表征聚合物流动特性的重要参数之一。应用熔体流动速率仪测定了3种粒径硅藻土(体积分数为10％)填充聚丙烯复合材料的MVR,考察口模直径和挤出工艺条件对复合体系流动特性的影响。复合材料的MVR随着口模直径的增加呈二次函数形式提高,随着填料粒径的增加而下降;当载荷及口模直径一定时,复合体系的MVR与温度呈线性函数关系;当载荷及温度固定时,复合体系的MVR与口模直径呈二次函数关系。
|
| 关 键 词： | 聚丙烯 硅藻土 口模直径 熔体体积流动速率 |
| 文章编号： | 1002-1396(2007)01-0043-04 |
| 修稿时间： | 2006-09-19 |
Effect of die diameter on flow property of PP/diatomite composite |
| |
| Liang Jizhao,Zhu Zhihua.Effect of die diameter on flow property of PP/diatomite composite[J].China Synthetic Resin and Plastics,2007,24(1):43-46. |
| |
| Authors: | Liang Jizhao Zhu Zhihua |
| |
| Affiliation: | College of Industry Equipment and Control Engineering, South China University of Technology, Guangzhou 510640, China |
| |
| Abstract: | Melt volume flow rate (MVR) is one of the important parameters for characterization of flow property of polymers. The MVR of polypropylene (PP) filled respectively with 10 vol.% diatomite in 3 kinds of particle sizes was measured by means of a melt flow rate instrument in order to investigate the effects of die diameter and extrusion conditions on the flow property of the composite systems. As the die diameter and particle size increased, the composite systems'MVR went up with the former in accordance with quadratic functional form while went down with the latter. In the case of setting the die diameter and load at a given value, the composite systems'MVR and temperature were conformed to a linear functional relation; in the case of fixing the load and temperature, the composite systems 'MVR was a quadratic function of the die diameter. |
| |
| Keywords: | polypropylene diatomite die diameter melt volume flow rate |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
