| 碳纳米管/环氧树脂体系固化工艺研究 |
| |
| 引用本文： | 姚英,王博.碳纳米管/环氧树脂体系固化工艺研究[J].山西化工,2013(5):9-12. |
| |
| 作者姓名： | 姚英 王博 |
| |
| 作者单位： | [1]太原工业学院,山西太原030008 [2]赛鼎工程有限公司,山西太原030032 |
| |
| 摘 要： | 研究了碳纳米管/环氧树脂体系固化过程的工艺条件。结果表明,实验过程中操作温度120℃,固化过程中起始固化温度120℃,固化温度180℃,碳纳米管/环氧树脂复合体系的固化动力学模型为自催化模型。添加碳纳米管会使复合材料的拉伸强度变强,但是当碳纳米管的质量分数达到1.5%时拉伸性能反而会下降。
|
| 关 键 词： | 碳纳米管 环氧树脂 固化 复合材料 |
The technological research of CNT/epoxy resin system solidification |
| |
| YAO Ying,WANG Bo.The technological research of CNT/epoxy resin system solidification[J].Shanxi Chemical Industry,2013(5):9-12. |
| |
| Authors: | YAO Ying WANG Bo |
| |
| Affiliation: | 1 Taiyuan Institute of Technology, Taiyuan Shanxi 030008,China; 2.Saiding Engineering Co., Ltd. ,Taiyuan Shanxi 030032,China ) |
| |
| Abstract: | This paper researched into the process condition of CNT/epoxy resin system solidification.The result shows that the operation temperature is 120℃ in the experiment, optimal starting temperature of solidification is 120℃,curiug temperature is 180℃. And the curing kinetics model of CNT/epoxy resin system is autocatalytic model. The tensile strength of the composite will increase by adding CNT. But when the content of CNT reaches 1.5t%, the tensile strength will decrease. |
| |
| Keywords: | CNT epoxy resin solidification composite |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
