| 汽车发动机冷却风扇仿真方法对比 |
| |
| 引用本文： | 王天利,海超,张波,刘苑.汽车发动机冷却风扇仿真方法对比[J].计算机辅助工程,2014,23(2):78-81. |
| |
| 作者姓名： | 王天利 海超 张波 刘苑 |
| |
| 作者单位： | 辽宁工业大学 汽车与交通工程学院;辽宁工业大学 汽车与交通工程学院;辽宁工业大学 汽车与交通工程学院;辽宁工业大学 汽车与交通工程学院 |
| |
| 摘 要： | 对比多参考坐标系(Multiple Reference Frame,MRF)模型和滑移网格模型(Sliding Mesh Model,SMM)在分析中的差异,分别应用FLUENT中的三维N-S方程和RNG湍流模型,对发动机冷却风扇的静止和旋转区域进行数值模拟,得到流道内空气的质量流量及风扇叶片表面的压力和速度矢量分布.SMM的结果更接近真实结果;根据SMM得出的结果说明MRF模型在工程领域的应用.
|
| 关 键 词： | 汽车 发动机 冷却风扇 多参考坐标系模型 滑移网格模型 CFD FLUENT |
| 收稿时间： | 2013/4/22 0:00:00 |
| 修稿时间： | 2013/5/23 0:00:00 |
Comparison of simulation methods of automobile engine cooling fan |
| |
| WANG Tianli,HAI Chao,ZHANG Bo and LIU Yuan.Comparison of simulation methods of automobile engine cooling fan[J].Computer Aided Engineering,2014,23(2):78-81. |
| |
| Authors: | WANG Tianli HAI Chao ZHANG Bo and LIU Yuan |
| |
| Affiliation: | College of Automobile & Transportation, Liaoning University of Technology;College of Automobile & Transportation, Liaoning University of Technology;College of Automobile & Transportation, Liaoning University of Technology;College of Automobile & Transportation, Liaoning University of Technology |
| |
| Abstract: | The simulation difference is compared between Multiple Reference Frame (MRF) model and Sliding Mesh Model(SMM). The 3D N S equation and RNG turbulence model of FLUENT are used to simulate the stationary area and rotatable area of automobile engine cooling fan. The air mass flow rate of flow channel and the surface pressure and velocity vector distribution of fan are obtained. The results of SMM are closer to the real results. According to the results of SMM, the application of MRF in engineering area is illustrated. |
| |
| Keywords: | automobile engine cooling fan multiple reference frame model sliding mesh model CFD FLUENT |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《计算机辅助工程》浏览原始摘要信息 |
|
点击此处可从《计算机辅助工程》下载全文 |
