| 原位增强SiC陶瓷 |
| |
| 引用本文： | 陈忠明,谭寿洪,江东亮.原位增强SiC陶瓷[J].无机材料学报,1997,12(2):195-199. |
| |
| 作者姓名： | 陈忠明 谭寿洪 江东亮 |
| |
| 作者单位： | 中国科学院上海硅酸盐研究所;上海 200050 |
| |
| 摘 要： | 实验采用β-SiC为起始原料，Y2O3、A12O3为烧结助剂，通过适当的烧结控制，获得了具有长柱状晶粒结构的α－SiC陶瓷，材料以液相烧结机制密化，在烧结过程中发生了与柱状晶形成有关的SiC晶粒3C→4H相变．材料的力学性能与晶粒的形态即长径比存在一定的依从关系，并显示出原位增强的特性．在较佳工艺条件下，材料的强度和韧性最大值分别达到620MPa、6．1MPa.m1/2．压痕裂纹扩展的途径表明，裂纹偏转和晶粒桥联是主要的增韧机理，这得益于其弱的界面结合．
|
| 关 键 词： | 碳化硅 柱状晶 原位增强 |
| 收稿时间： | 1996-2-6 |
| 修稿时间： | 1996-3-20 |
In-situ Reinforced SiC Ceramics |
| |
| CHEN Zhongming,TAN Shouhong,JIANG Dongliaug.In-situ Reinforced SiC Ceramics[J].Journal of Inorganic Materials,1997,12(2):195-199. |
| |
| Authors: | CHEN Zhongming TAN Shouhong JIANG Dongliaug |
| |
| Affiliation: | Shanghai Institute of Ceramics; Chinese Academy of Sciences Shanghai 200050 China |
| |
| Abstract: | SiC ceramics with rod-like grains were obtained by pressureless sintering of β-SiC powders with Y2O3 and Al2O3 as additives. The materials were densified based on liquid phase sintering mechanism. Thephase transformation of 3C→4H in SiC occurred during sintering, which was associated with the formationof rod-like grains. The mechanical properties of the materials depended on the aspect ratio of SiC grains,on the optimum, the maximum values of the flexural strength and fracture toughness reached 620MPa and 6.1MPa.m1/2 respectively. The trajectory of indentation crack revealed that the crack deflection and grain-bridging sere the main toughening mechanisms due to the weak grain-boundary. |
| |
| Keywords: | silicon carbide rod-like grains in-situ reinforcement |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《无机材料学报》浏览原始摘要信息 |
|
点击此处可从《无机材料学报》下载全文 |
