首页 | 本学科首页   官方微博 | 高级检索  
     

eXTP望远镜用W/Si多层膜
引用本文:齐润泽,黄秋实,杨洋,张众,王占山.eXTP望远镜用W/Si多层膜[J].光学精密工程,2017,25(11):2796-2802.
作者姓名:齐润泽  黄秋实  杨洋  张众  王占山
作者单位:同济大学 物理科学与工程学院 精密光学工程技术研究所 教育部先进微结构材料重点实验室, 上海 200092
基金项目:国家自然科学基金创新研究群体科学基金资助项目,国家自然科学基金资助项目
摘    要:针对增强型X射线时变与偏振探测卫星(eXTP)项目中嵌套式聚焦成像望远镜对柱面镜片上W/Si多层膜的要求,在掠入射角为0.5°,工作波段为1~30keV条件下,设计了非周期W/Si多层膜并优化了薄膜制备工艺。首先,利用分隔板和掩模板对溅射粒子进行准直,同时优化了本底真空度和溅射工作气压,提升了薄膜的成膜质量;然后,通过调整分隔板间距和公转速率提升了在柱面基底上薄膜的沉积均匀性;最后,利用幂指数算法设计了非周期多层膜,并在北京同步辐射光源上进行了多能点反射率测试,得到了与理论设计基本吻合的测试结果。基于优化的制备工艺制备了周期数为80,周期为3.8nm和W膜层厚度占比为0.47的W/Si周期多层膜,其界面粗糙度仅为0.29nm,柱面镜薄膜厚度误差可控制在3%以内,基本满足了eXTP项目中嵌套式掠入射望远镜镜片用多层膜对于成膜质量、沉积厚度均匀性和能谱响应宽度的需求。

关 键 词:eXTP项目  界面粗糙度  薄膜厚度均匀性  柱面镜  非周期多层膜
收稿时间:2017-06-09

DW/Si multilayer for eXTP mission
QI Run-ze,HUANG Qiu-shi,YANG Yang,ZHANG Zhong,WANG Zhan-shan.DW/Si multilayer for eXTP mission[J].Optics and Precision Engineering,2017,25(11):2796-2802.
Authors:QI Run-ze  HUANG Qiu-shi  YANG Yang  ZHANG Zhong  WANG Zhan-shan
Affiliation:Key Laboratory of Advanced Material Microstructure of Education Ministry of China, Institute Precision Optical Engineering, School of Physics Science and Engineering, Tongji University, Shanghai 200092, China
Abstract:For the requirements of an embedded focused imaging telescope in eXTP (enhanced X-ray Timing and Polarization satellite ) for W/Si multilayers on a cylindrical mirror ,W/Si multilayers were fabricated at a grazing incident angle of 0 .5 ° and working range of 1—30 keV , and multilayer fabrication technologies were optimized . Firstly , separator plates and masks were mounted to collimate the sputtering particles to optimize different background pressures and working gas pressures in the deposition process and to improve the quality of periodic multilayers .T hen ,a novel kind of revolution speed curve was designed for controlling the thickness to make the layer thickness be uniform at the mirror axes .The separator plates were mounted on the mounting plate on both sides of the mirror to make the different axis thicknesses be equal .Finally ,the depth-graded structure was designed by using the power law expression , a sample was prepared and measured in Beijing Synchrotron Radiation Facility (BSRF ) and the measured results are identical with that of design theory .By optimized multilayer fabrication technologies ,a multilayer with a d-spacing of 3 .8 nm , thickness ratio of tungsten of 0 .47 and the total number of bilayers of 80 was fabricated .The results show that the interfacial roughness of the multilayer is only 0 .29 nm and the layer thickness variation on the cylindrical mirror has been controlled less than 3% . T he measurement indicates that depth-graded multilayer can meet the requirements of the embedded focused imaging telescope in eXTP mission for layer quality ,layer thickness uniform and energy spectral response .
Keywords:eXTP mission  interfacial roughness  thickness uniform  cylindrical mirror  depth-graded multilayer
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《光学精密工程》浏览原始摘要信息
点击此处可从《光学精密工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号