首页 | 本学科首页   官方微博 | 高级检索  
     

激光表面熔覆层凝固组织特征形成过程
引用本文:王忠柯,郑启光,王涛.激光表面熔覆层凝固组织特征形成过程[J].激光技术,2000,24(1):64-66.
作者姓名:王忠柯  郑启光  王涛
作者单位:1.华中理工大学激光技术国家重点实验室, 武汉, 430074;
摘    要:试验研究了激光熔覆层的凝固特征和组织形成规律.结果表明:熔覆层不同位置的凝固特征参数不同.熔覆层底部属于典型的平面外延生长组织,且枝晶粗大;而顶部是较规则的树枝状共晶组织;中部为细小的胞晶和柱状晶;且晶体生长受结晶学各向异性影响.熔覆层组织晶粒形核的非均匀形核特征显著.熔覆层微区成分存在着不均匀性,不同元素沿晶间偏析(富集),是组织不均匀的重要原因.

关 键 词:激光熔覆    凝固特征    凝固组织
收稿时间:1999-01-30
修稿时间:1999-01-30

Study on the formation features of solidification microstructure for laser cladding layer
Wang Zhongke,Zheng Qiguang,Wang Tao,Gu Jianhui,Tao Xingzhi.Study on the formation features of solidification microstructure for laser cladding layer[J].Laser Technology,2000,24(1):64-66.
Authors:Wang Zhongke  Zheng Qiguang  Wang Tao  Gu Jianhui  Tao Xingzhi
Abstract:The investigation on the solidification features and formation law of microstructure for laser cladding layer has been carried out.It is shown that there are different solidification parameters for different position in cladding layer.The microstructure at the cladding layer bottom was the typical extension growth on plane basis,the dendrite crystal is coarser.The microstructure at the top and middle was the regular pine tree eutectic crystal and small cell and column crystal,respectively.The crystalline anisotropy was a main factor to influence the crystal growth form.The grain nucleation has obvious feature of heterogeneous nucleation in microstructure cladding.The results also show that the components in microzone of the cladding layer are not uniform.The different elements segregate along crystalline axis or interdendritic result in the non uniform microstructure.
Keywords:laser cladding    solidification feature      solidification microstructure
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《激光技术》浏览原始摘要信息
点击此处可从《激光技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号