首页 | 本学科首页   官方微博 | 高级检索  
     


Effects of cooling rate and B content on microstructure of near-eutectic Al-13wt%Si Alloy
Authors:Xi Xiao  Zhou Jianyuan  Lü Jianhua
Affiliation:The Sheet Trimming Plantof Second CRM,WISCO,Wuhan 430080,Hubei,China
Abstract:Under cooling rates of 2℃/s and 10℃/s.the Influences of B content on the microstructure of near eutectic Al-13.0wt%Si alloy have been investigated.Results showed that the addition of boron resulted in refinement of eutectic grains,and to some extent,had an inhibiting effect on precipitation of the primary phases,and the refining and inhibiting effects are much more obvious at higher cooling rate.When B was not added,higher cooling rate promoted the α-Al dendrites formation.At Iower cooling rate,the addition of B did not cause the so called"columnar to equiaxed transition(CET)",however,at higher cooling rate,this transition was obvious.After the addition of B,the nucleation temperature TN ascended and nucleation mode changed from nucleation mode of from wall towards centre(without B addition)to a nucleation mode that the eutectic nucleated evenly throughout whole sample (with B added).It can be concluded that the addition of B offers a Iarge amount of nuclei for eutectic solidification,as a result,the eutectic grains was refined.Higher cooling rate will lead to more nuclei,so the effects on the refinement of eutectic grains and on suppression of primary phases are increased.
Keywords:Al-S  alloy  microstructure  nucleation:cooling rate  microstructure  content  cooling rate  Effects  suppression  increased  lead  refined  result  eutectic solidification  sample  temperature  nucleation  mode  wall  centre  however  transition  cause  dendrites
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号