首页 | 本学科首页   官方微博 | 高级检索  
     

基于AT91SAM7S64与MAX7219间SPI通信设计与实现
引用本文:米红菊,吴志红,王百彦,彭文彬,陈红. 基于AT91SAM7S64与MAX7219间SPI通信设计与实现[J]. 现代电子技术, 2008, 31(13)
作者姓名:米红菊  吴志红  王百彦  彭文彬  陈红
作者单位:1. 四川大学电气信息学院,四川成都,610064;解放军后勤工程学院,重庆,400041
2. 四川大学计算机学院,四川成都,610064;视觉合成图形图像技术国防重点学科实验室,四川成都,610065
3. 四川大学电气信息学院,四川成都,610064
基金项目:国家高技术研究发展计划(863计划)
摘    要:随着电子技术的进步,发展出了很多总线接口,如USB,I2C,CAN,SPI等。它们的特点都采用了串行接口,只需一根或几根线就可以实现数据的传输。在嵌入式设备的开发中,这些接口的应用,使得处理器和其他外设很容易实现串行通信,大大的简化电路,提高了传输的可靠性。详细介绍了以ARM7TDMI为核心的芯片AT91SAM7S64的串行外设接口SPI,同时给出了带SPI接口的LED驱动芯片MAX7219的工作原理,并从硬件和软件上实现两芯片的SPI数据通信,最终驱动LED,得到一种稳定、可靠、高速的显示技术方案。

关 键 词:串行外设接口  AT91SAM7S64  MAX7219  keil uv3 forarm

Design and Realization of SPI Communication between AT91SAM7S64 and MAX7219
MI Hongju,WU Zhihong,WANG Baiyan,PENG Wenbin,CHEN Hong. Design and Realization of SPI Communication between AT91SAM7S64 and MAX7219[J]. Modern Electronic Technique, 2008, 31(13)
Authors:MI Hongju  WU Zhihong  WANG Baiyan  PENG Wenbin  CHEN Hong
Abstract:With the development of electronic technology,there are a number of Bus interfaces such as USB,I2 C,CAN,SPI etc.They all have a serial interface and just by a few lines they can realize the data transmission.By application of these interfaces in the embedded devices,it makes serial communication with other peripherals very easy,and simplifies circuit greatly and improves transmission reliability.This paper describes the theory of AT91SAM7S64 serial peripheral interface and LED driver chip MAX7219,and how to realize the SPI communication between AT91SAM7S64 and MAX7219.A stable,reliable and high speed display technology scheme is gained.
Keywords:serial peripheral interface  AT91SAM7S64  MAX7219  keil uv3 for arm
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号