首页 | 本学科首页   官方微博 | 高级检索  
     

一种配电网拓扑结构辨识方法的探讨
引用本文:李虹,张占龙,高亚静.一种配电网拓扑结构辨识方法的探讨[J].中国电力,2015,48(5):133-138.
作者姓名:李虹  张占龙  高亚静
作者单位:1. 华北电力大学 新能源电力系统国家重点实验室,河北 保定 071003;2. 国网江苏省电力公司镇江供电公司,江苏 镇江 212001
基金项目:中央高校基本科研业务费专项资金资助项目(11QG59)
摘    要:针对配电网实时量测有限,并且开关、刀闸设备缺乏实时遥信的情况,提出了一种配电网拓扑结构辨识方法——最优匹配回路功率法。该方法基于最优匹配回路功率,寻找出了若干种有可能的配电网拓扑结构,利用相同的量测值在不同的拓扑结构下分别进行状态估计,选择与量测匹配度最好的拓扑结构作为当前的可信拓扑结构。这样,将网络拓扑辨识问题转换成了以量测匹配度好为目标的网络重构问题。算例表明,该方法可行有效。

关 键 词:配电网  拓扑结构  辨识  状态估计  
收稿时间:2015-02-14

Research and Discussion on a Method for Topology Identification of Distribution System
LI Hong,ZHANG Zhanlong,GAO Yajing.Research and Discussion on a Method for Topology Identification of Distribution System[J].Electric Power,2015,48(5):133-138.
Authors:LI Hong  ZHANG Zhanlong  GAO Yajing
Affiliation:1. State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Baoding 071003, China; 2. State Grid Jiangsu Zhenjiang Electric Power Company, Zhenjiang 212001, China
Abstract:The real-time measurements in distribution network are very limited, and it is a technical challenge to identify the topology of distribution network. In this paper, the concept of optimal matching loop power is proposed. Based on optimal matching loop power, an efficient iden-tification method is developed, which can find out several possible topologies. Then, the state es-timator is used to choose the most reasonable topology with the minimal measurement residuals. In the proposed method, the topology identification is converted to the problem of network recon-figuration whose objective is the minimal measurement residuals. Numerical tests prove that the proposed method is potentially applicable to the practice.
Keywords:distribution system  identification of topology  state estimation  
点击此处可从《中国电力》浏览原始摘要信息
点击此处可从《中国电力》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号