首页 | 本学科首页   官方微博 | 高级检索  
     

压缩机试验台冷凝温度与过冷度的控制方法优化
引用本文:刘桂平,胡盛文,黄灵世. 压缩机试验台冷凝温度与过冷度的控制方法优化[J]. 制冷与空调(北京), 2014, 0(8): 60-62
作者姓名:刘桂平  胡盛文  黄灵世
作者单位:珠海格力电器股份有限公司
摘    要:为了提高压缩机试验台的控制精度与调节速度,用风冷式压缩冷凝机组和可调电加热器,将水箱中的冷却水温控制在一定的温度,再从水箱中引出2支水路,一路通到冷凝器,另外一路通到过冷器,并在这2支水路上分别设置自动调节阀,最终通过调节水流量大小,实现对冷凝温度和过冷度的精确控制。此方法可使冷凝温度、过冷度控制偏差均在0.02℃以内,工况稳定时间在30 min以内。

关 键 词:压缩机  冷凝温度  过冷度  优化控制  性能测试

Optimization of control method for condensing temperature and subcooling temperature of compressor test-bed
Liu Guiping,Hu Shengwen,Huang Lingshi. Optimization of control method for condensing temperature and subcooling temperature of compressor test-bed[J]. Refrigeration and Air-conditioning, 2014, 0(8): 60-62
Authors:Liu Guiping  Hu Shengwen  Huang Lingshi
Affiliation:(Gree Electric Appliances, Inc. of Zhuhai)
Abstract:In order to improve the test precision and the adjusting speed of the compressor test-bed,the cooling-water temperature in the water tank is controlled to a certain range using aircooled compressor condensing unit and adjustable electrical heater.Then educe two water ways from the water tank,one to the condenser,the other to the super-cooler.And an automatic adjusting valve is set on both of the water ways for controlling the water flow to get a condensing temperature and subcooling temperature precisely.By this control method,the control deviation of condensing temperature and subcooling temperature can be controlled within0.02℃,and the operating condition will be steady within30 minites.
Keywords:compressor  condensing temperature  subcooling temperature  optimal con-trol  performance test
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号