首页 | 本学科首页   官方微博 | 高级检索  
     

高强船板钢EH36拉力分层原因分析
引用本文:帅勇,陈远清,付军,仇圣桃,廖鹏. 高强船板钢EH36拉力分层原因分析[J]. 钢铁钒钛, 2012, 33(4): 92-95,100
作者姓名:帅勇  陈远清  付军  仇圣桃  廖鹏
作者单位:1. 新余钢铁股份有限公司第二炼钢厂,江西新余,338001
2. 钢铁研究总院连铸技术国家工程研究中心,北京,100081
摘    要:针对高强船板EH36在拉伸试验时试样的1/2厚度附近出现的严重分层现象,利用金相检验、扫描电镜观察等手段对试样断口及剖面进行分析研究,明确了分层产生的原因,并提出相应的控制措施。研究结果表明,造成钢板中心分层的直接原因是带状组织和中心的层片状MnS夹杂,而根本原因是连铸过程中C、Mn、S的中心偏析。

关 键 词:船板钢EH36  拉力分层  中心偏析  带状组织  MnS

Analysis on the Cause of Splitting during Tensile Test of High Strength Steel EH36 for Ship Plate
Shuai Yong , Chen Yuanqing , Fu Jun , Qiu Shengtao , Liao Peng. Analysis on the Cause of Splitting during Tensile Test of High Strength Steel EH36 for Ship Plate[J]. Iron Steel Vanadium Titanium, 2012, 33(4): 92-95,100
Authors:Shuai Yong    Chen Yuanqing    Fu Jun    Qiu Shengtao    Liao Peng
Affiliation:1(1.The Second Steelmaking Plant,Xinyu Iron & Steel Co.Ltd.,Xinyu 338001,Jiangxi,China;2.National Engineering and Research Center for Continuous Casting Technology,Central Iron and Steel Research Institute,Beijing 100081,China)
Abstract:Serious spitting phenomenon occurred in the center of the plate during tensile test of high strength steel EH36 for ship plate use.Metallographic examination and scanning electron microscope have been taken to observe the fracture and section of specimen.And then the causes of splitting have been identified and corresponding control methods have been proposed.The study results show that the direct reasons for splitting include banded structure and lamellar MnS inclusion in the center of the steel plate,while the fundamental reason is the central segregation of carbon,sulphur and manganese during continuous casting process.
Keywords:steel EH36 for ship plate use  tensile splitting  central segregation  banded structure  MnS
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号