首页 | 本学科首页   官方微博 | 高级检索  
     

一种低负载启动的智能RF遥控与触摸照明开关的设计
引用本文:杨道忠,;罗中良,;陈治明,;邓雪晴.一种低负载启动的智能RF遥控与触摸照明开关的设计[J].电脑与微电子技术,2014(16):63-67.
作者姓名:杨道忠  ;罗中良  ;陈治明  ;邓雪晴
作者单位:[1] 惠州天阳精密科技有限公司,惠州516000; [2] 惠州学院计算机系,惠州516007
基金项目:2013年地方高校国家级大学生创新创业训练计划项目(No.201310644008); 四川文理学院教育教学改革研究重点项目(No.2013JZ25)
摘    要:智能照明控制技术的发展,使得智能照明控制器被大量应用。目前市场上的智能照明控制器大多数采用两线制连接,而不适应家庭单火线控制开关的替换。为了和传统传统机械式开关采用单火线控制的方式兼容,并特别考虑日益广泛的LED这类低负载小电流的控制电路的启动,提出一种单线制的改进方法,使智能照明控制器在4W负载下能够启动,并在安装连接时不需要改变线路。

关 键 词:单火线取电  智能开关  无极控制  RF遥控

Design of Intelligent Low Log-on Load RF Remote Control and Touch Lighting Switch
Affiliation:YANG Dao-zhong, LUO Zhong-liang, CHEN Zhi-ming, DENG Xue-qing (1. Huizhou Techwin Precise Technology Co. Ltd., Huizhou 516001; 2. Huizhou University, Huizhou 516007)
Abstract:With the development of intelligent lighting control technology, intelligent lighting controllers are used widely. Most of the intelligent lighting controllers in the market are using the two-wired connecting mode, making it unfit for household single-live-wire control switch. In order to be compatible with the traditional mechanical single-live-wire control switch, and specially considering the start up of those low-load and low-current control circuit such as LED, proposes an improved single wire method, makes the lighting controller start up under a 4W load, and no wires need to be changed when wiring.
Keywords:Single Live Wire Power  Intelligent Switch  Non-Polar Control  RF Remote Control
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号