| 采用热弹塑性有限元方法预测低碳钢钢管焊接变形 |
| |
| 引用本文： | 邓德安,梁伟,罗宇,村川英一.采用热弹塑性有限元方法预测低碳钢钢管焊接变形[J].焊接学报,2006,27(1):76-80. |
| |
| 作者姓名： | 邓德安 梁伟 罗宇 村川英一 |
| |
| 作者单位： | 重庆大学,机械工程学院,重庆,400044;大阪大学,接合科学研究所,日本大阪,567-0047;上海交通大学,船舶海洋及建筑工程学院,上海,200030 |
| |
| 摘 要： | 用有限元分析软件ABAQUS Code开发了用于模拟焊接温度场、焊接残余应力和焊接变形的热弹塑性有限元计算方法.通过建立三维有限元模型,预测了低碳钢钢管多层焊接时的温度场和焊接变形,并通过试验验证了所提出计算方法的精度和有效性.结果表明,在多层焊接条件下,采用有限元方法计算得到的焊接变形与试验结果十分吻合.
|
| 关 键 词： | 焊接变形 温度场 有限元 数值分析 多层焊 |
| 文章编号： | 0253-360X（2006）01-76-05 |
| 收稿时间： | 2004-08-24 |
| 修稿时间： | 2004-08-24 |
Prediction of welding deformation in mild steel pipe using thermal elastic plastic finite element method |
| |
| DENG De-an,LIANG Wei,LUO Yu and Hidekazu Murakawa.Prediction of welding deformation in mild steel pipe using thermal elastic plastic finite element method[J].Transactions of The China Welding Institution,2006,27(1):76-80. |
| |
| Authors: | DENG De-an LIANG Wei LUO Yu and Hidekazu Murakawa |
| |
| Affiliation: | Chongqing University, Chongqing 400044, China,Osaka University, Osaka 567-0047, Japan,Shanghai Jiaotong University, Shanghai 200030, China and Osaka University, Osaka 567-0047, Japan |
| |
| Abstract: | Based on the commercial software ABAQUS code,a thermal elastic plastic finite element model was founded to predict the welding temperature field,welding residual stress and deformation.A three dimensional finite element(FE) model was employed to simulate the temperature field and welding deformation in mild steel pipe by a multi-pass welding process.Experiment was also carried out to verify the simulated results.The final welding deformation simulated by the proposed numerical method is in a good agreement with the experimental results. |
| |
| Keywords: | welding deformation temperature field finite element method numerical analysis multi-pass welding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
