首页 | 本学科首页   官方微博 | 高级检索  
     

多次加-卸载条件下考虑颗粒破碎的钙质砂一维压缩特性研究
引用本文:龙蛟,顾琳琳,王振,CHENG Chen. 多次加-卸载条件下考虑颗粒破碎的钙质砂一维压缩特性研究[J]. 水利水运工程学报, 2022, 0(1): 144-150. DOI: 10.12170/20210225002
作者姓名:龙蛟  顾琳琳  王振  CHENG Chen
作者单位:1.南京理工大学 理学院,江苏 南京 210094
基金项目:国家自然科学基金青年基金资助项目(51908288);江苏省研究生科研与实践创新计划项目(SJCX20_0149)
摘    要:南沙群岛附近海域钙质砂多为珊瑚礁碎屑,是一种未胶结的疏松松散颗粒聚集体,颗粒极易产生破碎。为研究钙质砂颗粒破碎特性对其压缩特性的影响,对钙质砂开展多次加-卸载条件下的一维压缩试验,采用相对破碎率为度量指标,评价钙质砂在多次加-卸载过程中颗粒破碎情况;根据试验数据得到反复加-卸载过程中砂样的塑性功,通过建立塑性功与相对破碎率的关系,探讨颗粒破碎对钙质砂一维压缩特性的影响。研究表明:颗粒破碎率随压力的增大而显著增大,颗粒破碎过程具有明显的应力历史依赖性,随着反复的加-卸载,颗粒破碎率的增幅越来越小;同时钙质砂的颗粒破碎率与塑性功呈幂函数关系,且随着塑性功的增加,颗粒破碎率的变化率逐渐减小。

关 键 词:钙质砂   多次加-卸载   侧限压缩试验   颗粒破碎   塑性功
收稿时间:2021-02-25

Study on one-dimensional compression characteristics of calcareous sand considering particle breakage under multiple loading-unloading conditions
LONG Jiao,GU Linlin,WANG Zhen,CHENG Chen. Study on one-dimensional compression characteristics of calcareous sand considering particle breakage under multiple loading-unloading conditions[J]. Hydro-Science and Engineering, 2022, 0(1): 144-150. DOI: 10.12170/20210225002
Authors:LONG Jiao  GU Linlin  WANG Zhen  CHENG Chen
Affiliation:1.School of Science, Nanjing University of Science & Technology, Nanjing 210094, China2.School of Mechanical Engineering, Nanjing University of Science & Technology, Nanjing 210094, China3.Glasgow International College, University of Glasgow, Glasgow G12 8QQ, United Kingdom
Abstract:The calcareous sand was taken from the sea areas near Nansha Island, mostly coral reef debris. It was an unconsolidated loose particle aggregate, which was easy to produce particle breakage. In order to study the influence of calcareous sand particle crushing characteristics on its compression characteristics, the one-dimensional compression test of calcareous sand was carried out under repeated loading-unloading conditions, and the compression characteristics was analysed. The particle breakage of calcareous sand in the process of repeated loading-unloading was evaluated by using the relative breakage rate Br as the measurement index. Meanwhile, the plastic work of calcareous sand in the process of repeated loading-unloading was obtained according to the test data. By establishing the relationship between the plastic work and the relative breakage rate, the influence of particle breakage on one-dimensional compression characteristics was discussed. The results show that particle breakage increased significantly with the increase of loading pressure, and the process of particle breakage was obvious stress history dependent; with repeated loading-unloading, the increase of particle breakage rate became smaller and smaller; meanwhile, the relationship between particle breakage rate and plastic work of calcareous sand presented a power function, and the change rate of particle breakage rate gradually decreased with the increase of plastic work.
Keywords:
本文献已被 万方数据 等数据库收录!
点击此处可从《水利水运工程学报》浏览原始摘要信息
点击此处可从《水利水运工程学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号