Poly(styrene)‐ and Poly(styrene‐co‐methyl methacrylate)‐graft‐hydrogenated natural rubber latex: Aspect on synthesis,properties, and compatibility |
| |
| Authors: | Siriporn Sakorn Garry L. Rempel Pattarapan Prasassarakich Napida Hinchiranan |
| |
| Affiliation: | 1. Program in Petrochemistry and Polymer Science, Faculty of Science, Chulalongkorn University, Bangkok, Thailand;2. Department of Chemical Engineering, University of Waterloo, Ontario, Canada;3. Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Bangkok, Thailand |
| |
| Abstract: | The undesirable properties of natural rubber (NR) can be improved via hydrogenation and graft copolymerization. Hydrogenated NR (HNR) latex was prepared via diimide reduction and then grafted with styrene (ST) or ST/methyl methacrylate (MMA) to form poly(ST)‐graft‐HNR (poly(ST)‐g‐HNR, GHNRS) or poly(ST‐co‐MMA)‐g‐HNR (GHNRSM), respectively. For the grafting of ST monomer onto HNR particles, the %monomer conversion and %grafting efficiency (%GE) were monitored as functions of %hydrogenation, monomer and initiator concentrations, temperature, and time. Under the optimum condition (HNR with 54.3% hydrogenation; 100 phr of ST, 1 phr of initiator at 50°C for 8 h), maximum %conversion and %GE of 44.6% and 36.9%, respectively, were achieved. Thermogravimetric analysis revealed that the HNR grafted with ST or ST/MMA had higher decomposition temperature than an ungrafted one. When these graft products were blended at 10% (w/w) with acrylonitrile‐butadiene‐styrene (ABS) resin, the GHNRS/ABS and GHNRSM/ABS composites exhibited the higher flexural strength and heat aging tolerance compared to the ungrafted HNR/ABS composite. Scanning electron microscopy (SEM) also showed the higher degree of homogeneity at the fractural surface, supporting the higher compatibility between the ABS and the GHNRS or GHNRSM phases in the blends. J. VINYL ADDIT. TECHNOL., 22:100–109, 2016. © 2014 Society of Plastics Engineers |
| |
| Keywords: | |
|
|
