首页 | 本学科首页   官方微博 | 高级检索  
     

焦化加热炉炉管腐蚀失效分析
引用本文:胡小芳,吴成宝,汪海军.焦化加热炉炉管腐蚀失效分析[J].腐蚀科学与防护技术,2007,19(1):71-73.
作者姓名:胡小芳  吴成宝  汪海军
作者单位:华南理工大学,工业装备与控制工程学院,广州,510640
基金项目:广东省151工程支持项目
摘    要:应用扫描电子显微镜、能谱分析以及X射线衍射仪对焦化加热炉炉管的高温腐蚀形貌,腐蚀物成分以及物相进行了分析,结果表明,由于炉膛操作温度过高,且燃料中含硫,Cr5Mo钢炉管不但发生高温氧化腐蚀,还发生硫化腐蚀,使破坏加速,最终导致炉管失效.同时提出了预防措施

关 键 词:加热炉  氧化腐蚀  硫化腐蚀  失效分析
文章编号:1002-6495(2007)01-0072-02
收稿时间:2005-10-09
修稿时间:2005-12-23

CORROSION FAILURE ANALYSIS OF REHEATING FURNACE TUBES
HU Xiao-fang,WU Ccheng-bao,WANG Hai-jun.CORROSION FAILURE ANALYSIS OF REHEATING FURNACE TUBES[J].Corrosion Science and Protection Technology,2007,19(1):71-73.
Authors:HU Xiao-fang  WU Ccheng-bao  WANG Hai-jun
Affiliation:College of Industrial Equipment and Control Engineering, South China University of Te Technology, Guangzhou 510640
Abstract:The corrosion morphology,chemical composition and phase constrtuents of corrosion products of reheating furnace tubes were analyzed by scanning electron microscopy(SEM),energy spectrum analysis and X-Ray diffraction.The results show that the tubes were suffered from high temperature oxidation and sulphidation for the operation temperature being higher than the desired ones,though reheating tubes were made by Cr5Mo steel which has good anticorrosion and mechanics performance.As a result corrosion caused tube invalidation finally.
Keywords:reheating furnace  oxidative corrosion  sulphide corrosion  failure analysis
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《腐蚀科学与防护技术》浏览原始摘要信息
点击此处可从《腐蚀科学与防护技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号