| 提升聚酯熔体端羧基改善可纺性 |
| |
| 引用本文： | 潘鑫,朱成,张德强,沈荣,汪名意,周爱玉.提升聚酯熔体端羧基改善可纺性[J].合成纤维,2022,51(1):1-3. |
| |
| 作者姓名： | 潘鑫 朱成 张德强 沈荣 汪名意 周爱玉 |
| |
| 作者单位： | 浙江恒优化纤有限公司,浙江嘉兴314201 |
| |
| 摘 要： | 对端羧基产生的原因及其对纺丝性能的影响进行了讨论,并结合现有的生产装置情况,发现聚酯的端羧基含量在47 mol/t及以上时,长丝生产线的断头现象明显减少.结合试验,通过弱化酯化反应,提升酯化Ⅰ、酯化Ⅱ反应阶段酸值的方法将端羧基含量提升至47 mol/t左右.
|
| 关 键 词： | 聚酯 端羧基 可纺性 |
Improving Spinnability by Increasing End Carboxyl Group of PET Melt |
| |
| PAN Xin,ZHU Cheng,ZHANG De-qiang,SHEN Rong,WANG Ming-yi,ZHOU Ai-yu.Improving Spinnability by Increasing End Carboxyl Group of PET Melt[J].Synthetic Fiber in China,2022,51(1):1-3. |
| |
| Authors: | PAN Xin ZHU Cheng ZHANG De-qiang SHEN Rong WANG Ming-yi ZHOU Ai-yu |
| |
| Affiliation: | ,Zhejiang Hengyou Chemical Fiber Co., Ltd. |
| |
| Abstract: | The causes of end carboxyl group and its influence on spinning performance are discussed. Combined with existing production device, it is found that when the end carboxyl group content of polyester is47 mol/t or above, the end breakage phenomenon of filament production line is significantly reduced. Combined with the experiment, the content of end carboxyl group is improved to about 47 mol/t by weakening the esterification reaction and increasing the acid value of esterification I and esterification II. |
| |
| Keywords: | PET end carboxyl group spinnability |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
