| 主泵泵壳锻件锻造成形工艺研究 |
| |
| 引用本文： | 高润哲,刘凯泉,刘敬杰.主泵泵壳锻件锻造成形工艺研究[J].大型铸锻件,2022(1):1-3. |
| |
| 作者姓名： | 高润哲 刘凯泉 刘敬杰 |
| |
| 作者单位： | 天津重型装备工程研究有限公司,天津300457 |
| |
| 摘 要： | 针对"华龙一号"主泵泵壳超大异形结构的特点,制定了仿形锻造成形工艺方案,运用Forge软件对拔正八方过程进行数值模拟,优化了成形工艺参数,在实现多向变形的同时也得到了较好的正八方外形,泵壳锻件的试制成功证明了该工艺可行.
|
| 关 键 词： | 主泵泵壳 正八方 偏心冲孔 |
Research on Forging Forming Process of Main Pump Shell Forging |
| |
| Gao Runzhe,Liu Kaiquan,Liu Jingjie.Research on Forging Forming Process of Main Pump Shell Forging[J].Heavy Casting and Forging,2022(1):1-3. |
| |
| Authors: | Gao Runzhe Liu Kaiquan Liu Jingjie |
| |
| Abstract: | According to the characteristics of the extra-large special-shaped structure of the main pump shell of“HPR1000”,a profiling forging process plan has been developed,and the Forge software has been used to numerically simulate the regular octagon drawing process,and the forming process parameters have been optimized to achieve multi-directional deformation and good regular octagon,and the successful trial production of pump shell forgings proves the feasibility of this process. |
| |
| Keywords: | main pump shell regular octagon eccentric punching |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
