Optimal design of geometric parameters of double-layered microchannel heat sinks |
| |
Authors: | Tu-Chieh Hung Wei-Mon Yan Xiao-Dong Wang Yu-Xian Huang |
| |
Affiliation: | 1. Department of Mechanical Engineering, Military Academy, Kaohsiung 83059, Taiwan, ROC;2. Department of Greenergy, National University of Tainan, Tainan 70005, Taiwan, ROC;3. NCKU Research Center for Energy Technology and Strategy, Tainan 70101, Taiwan, ROC;4. Beijing Key Laboratory of New and Renewable Energy, North China Electric Power University, Beijing 102206, China;5. Department of Mechanical Engineering, National Cheng-Kung University, Tainan 70101, Taiwan, ROC |
| |
Abstract: | This work uses an optimization procedure consisting of a simplified conjugate-gradient method and a three-dimensional fluid flow and heat transfer model to investigate the optimal geometric parameters of a double-layered microchannel heat sink (DL-MCHS). The overall thermal resistance RT is the objective function to be minimized, and the number of channels N, channel width ratio β, lower channel aspect ratio αl, and upper channel aspect ratio αu are the search variables. For a given bottom area (10 × 10 mm) and heat flux (100 W/cm2), the optimal (minimum) thermal resistance of the double-layered microchannel heat sink is about RT = 0.12 °C/m2W. The corresponding optimal geometric parameters are N = 73, β = 0.50, αl = 3.52, and, αu = 7.21 under a total pumping power of 0.1 W. These parameters reduce the overall thermal resistance by 52.8% compared to that yielded by an initial guess (N = 112, β = 0.37, αl = 10.32, and αu = 10.93). Furthermore, the optimal thermal resistance decreases rapidly with the pumping power and then tends to approach an constant value. As the pumping power increases, the optimal values of N, αl, and αu increase, whereas the optimal β value decreases. However, increasing the pumping power further is not always cost-effective for practical heat sink designs. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|