Effects of Cobalt on Structure,Microchemistry and Properties of a Wrought Nickel-Base Superalloy

Cobalt in a 17 pct cobalt containing wrought nickel-base superalloy is systematically substituted for by nickel in order to determine the role of cobalt. The eventual goal is to reduce the levels of cobalt, a critical strategic element, in superalloys. It is found that the strengthening γ microstructure is highly heat treatment sensitive. Reducing cobalt did not result in a reduction of the fine γ precipitates after a coarse grain type (blading) heat treatment, but did after a fine grain type (disk) heat treatment. Representative mechanical properties were determined for each case to isolate microstructural and microchemistry effects. Ambient yield strength and tensile strength were seen to decrease by no more than 15 pct and 7 pct, respectively, even when all the cobalt was removed. The decrease in strength is quantitatively discussed and shown to be consistent with the observed microstructural results and microchemistry results obtained using STEM/EDS. Elevated temperature creep and stress rupture resistances were concluded to be affected by alloy cobalt content through its effect on strengthening γ volume fraction. Significant decreases in these properties were observed for the lower cobalt content alloys. Long term aging, precipitate coarsening, and carbide stability results are also presented and discussed.