| 汽车标志注射模的浇口设计 |
| |
| 引用本文： | 袁小江. 汽车标志注射模的浇口设计[J]. 模具制造, 2007, 7(10): 49-50 |
| |
| 作者姓名： | 袁小江 |
| |
| 作者单位： | 江苏无锡科技职业学院,江苏无锡,214028 |
| |
| 摘 要： | 介绍了一些外观要求较高的塑件产品,如汽车的标志、外用商标等模具的浇口设置方法,保证了产品质量及外观要求.
|
| 关 键 词： | 浇口 推杆 型腔 定模 |
Design of Injection Mold Gate for the Car Lable |
| |
| Yuan Xiaojiang. Design of Injection Mold Gate for the Car Lable[J]. Die & Mould Manufacture, 2007, 7(10): 49-50 |
| |
| Authors: | Yuan Xiaojiang |
| |
| Abstract: | Introduced the gate design method of some plastic with higher external appearance request, such as the car lable and external trade mark.the product quality and appearance are good. |
| |
| Keywords: | gate pusher pin mold cavity fixed mold |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
