首页 | 本学科首页   官方微博 | 高级检索  
     

L波段1200W固态功率放大器的设计
引用本文:孟庆贤,席洪柱,万航,王亮,王林,叶鑫,詹锐. L波段1200W固态功率放大器的设计[J]. 电子与封装, 2022, 22(2): 44-49. DOI: 10.16257/j.cnki.1681-1070.2022.0204
作者姓名:孟庆贤  席洪柱  万航  王亮  王林  叶鑫  詹锐
作者单位:安徽华东光电技术研究所有限公司,安徽芜湖241000
基金项目:安徽省中央引导地方科技发展专项资金项目;安徽省重点研究与开发计划项目
摘    要:基于L波段750 W的LDMOS功放管,设计了一种1200 W固态功率放大器,该放大器由功率放大电路、水冷板、稳压电源、控保电路等部分组成,支持连续波和脉冲两种工作方式。通过对放大电路的设计,采用三级级联放大,制作了固态功率源实物样机并进行了测试。测试结果表明,固态功率放大器工作频率为1.3 GHz,带宽为±5 MHz,最大输出功率能够达到1300 W,具有体积小、成本低、输出功率稳定、相噪低、谐波抑制度高等优点,能应用于加速器、微波加热、物联网、移动通信等领域。

关 键 词:L波段  功率放大器  级联放大

Design of L-Band 1200 W Solid State Power Amplifier
MENG Qingxian,XI Hongzhu,FANG Hang,WANG Liang,WANG Lin,YE Xin,ZHAN Rui. Design of L-Band 1200 W Solid State Power Amplifier[J]. Electronics & Packaging, 2022, 22(2): 44-49. DOI: 10.16257/j.cnki.1681-1070.2022.0204
Authors:MENG Qingxian  XI Hongzhu  FANG Hang  WANG Liang  WANG Lin  YE Xin  ZHAN Rui
Affiliation:(Huadong Photoelectric Technology Institute Co.,Ltd.,Wuhu 241000,China)
Abstract:Based on the L-band 750 W LDMOS power amplifier,a 1200 W solid state power amplifier is realized.The amplifier is composed of power amplifier circuit,water cooling plate,stabilized power supply,control and protection circuit,supporting two working modes of continuous wave and pulse.Through the design of the amplifier circuit,the solid-state power amplifier prototype is made and tested by using three-stage cascade amplification.The test results show that the solid-state power amplifier's operating frequency is 1.3 GHz,bandwidth is±5 MHz,and maximum output power can reach 1300 W.It has the advantages of small volume,inexpensive,stable output power,low phase noise,high harmonic suppression.It can be used in accelerator,microwave heating,internet of things,mobile communication,and other fields.
Keywords:L-band  power amplifier  cascade amplification
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号