| 超声-电沉积Ni-TiN复合镀层组织和性能研究 |
| |
| 引用本文： | 雪金海,吴蒙华,夏法锋. 超声-电沉积Ni-TiN复合镀层组织和性能研究[J]. 表面技术, 2009, 38(4): 13-15,38 |
| |
| 作者姓名： | 雪金海 吴蒙华 夏法锋 |
| |
| 作者单位： | 大连大学机械工程学院,辽宁,大连,116622;大庆石油学院机械科学与工程学院,黑龙江,大庆,163318 |
| |
| 基金项目： | 辽宁省自然科学基金项目，辽宁省优秀人才支持计划项目，辽宁省教育厅高校科学研究项目 |
| |
| 摘 要： | 为了探讨复合镀层的组织和性能,采用超声-电沉积制备了Ni-TiN复合镀层.对镀层的表面形貌、显微硬度和磨损性能进行了研究,分析了Ni-TiN复合镀层的耐磨机理.结果表明:由于超声波的辅助作用和TiN纳米粒子的加入,镀层表面比较平整,光滑;在超声波和高频脉冲电流复合作用下,纳米TiN粒子含量为12%的Ni-TiN复合镀层具有较高的显微硬度和耐磨性能,平均表面硬度达到HV927.2,磨损量仅为14.1mg;纳米TiN粒子的弥散错位强化作用、细晶强化效应及一定承载和润滑作用是提高Ni-TiN复合镀层耐磨性的根本原因.
|
| 关 键 词： | 超声-电沉积 复合镀层 显微硬度 耐磨机理 |
Study on Microstructure and Properties of Ultrasonic-electrodeposited Ni-TiN Composite Layer |
| |
| XUE Jin-hai,WU Meng-hua,XIA Fa-feng. Study on Microstructure and Properties of Ultrasonic-electrodeposited Ni-TiN Composite Layer[J]. Surface Technology, 2009, 38(4): 13-15,38 |
| |
| Authors: | XUE Jin-hai WU Meng-hua XIA Fa-feng |
| |
| Affiliation: | XUE Jin-hai1,WU Meng-hua1,XIA Fa-feng2(1.School of Mechanical Engineering,Dalian University,Dalian 116622,China)(2.School of Science , Mechanical Engineering,Daqing Petroleum Institute,Daqing 163318,China) |
| |
| Abstract: | In order to discuss the organization and performance of composite layer,Ni-TiN composite layer was prepared by ultrasonic-electrodeposited technology.The surface topography,microhardness and wear resistance of composite layer were studied.The wear mechanism of Ni-TiN composite layer was analyzed.The results show that the surface of Ni-TiN composite layer is relatively flat and smooth with the ultrasound-assisted action and TiN nano-particles added. With the compound effect of the ultrasound and high-frequen... |
| |
| Keywords: | Ultrasonic-electrodeposition Composite Layer Microhardness Wear mechanism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
