| 甲醇重整微槽道反应器加工工艺的研究 |
| |
| 引用本文： | 于新海,涂善东,王正东,马玉录,戚蕴石. 甲醇重整微槽道反应器加工工艺的研究[J]. 电池, 2006, 36(4): 305-307 |
| |
| 作者姓名： | 于新海 涂善东 王正东 马玉录 戚蕴石 |
| |
| 作者单位： | 华东理工大学机械与动力工程学院,上海,200237;华东理工大学机械与动力工程学院,上海,200237;华东理工大学机械与动力工程学院,上海,200237;华东理工大学机械与动力工程学院,上海,200237;华东理工大学机械与动力工程学院,上海,200237 |
| |
| 基金项目： | 国家自然科学基金，高等学校博士学科点专项科研项目 |
| |
| 摘 要： | 研制了一种甲醇重整微槽道反应器加工工艺。通过电火花加工技术,在合金片上加工出平行的微槽道,然后通过扩散焊将多层合金片焊接在一起,最后将催化剂涂层负载到微槽道反应器的内壁上。该微槽道反应器的氢气产率(0.37mol/h)可满足11 W燃料电池的需要。
|
| 关 键 词： | 微槽道 反应器 甲醇重整 燃料电池 |
| 文章编号： | 1001-1579(2006)04-0305-03 |
| 修稿时间： | 2006-01-07 |
Study on the manufacturing process of micro-channel reactor for methanol reforming |
| |
| YU Xin-hai,TU Shan-dong,WANG Zheng-dong,MAI Yu-lu,QI Yun-shi. Study on the manufacturing process of micro-channel reactor for methanol reforming[J]. Battery Bimonthly, 2006, 36(4): 305-307 |
| |
| Authors: | YU Xin-hai TU Shan-dong WANG Zheng-dong MAI Yu-lu QI Yun-shi |
| |
| Abstract: | A manufacturing process of micro-channel reactor for methanol reforming was prepared.Parallel micro-channels were patterned on alloy sheets by electric spark processing technology.Then,dozens of the multilayer alloy sheets were manufactured into a single structure by diffusion welding.At last,the catalytic coating was coated on the inner wall of the micro-channel reactor.The developed micro-channel reactor could generate enough hydrogen(0.37 mol/h) for power output of 11 W type fuel cell. |
| |
| Keywords: | micro-channel reactor methanol reforming fuel cell |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
