首页 | 本学科首页   官方微博 | 高级检索  
     

纯铝材在硫酸中恒流阳极氧化机理初探
引用本文:张胜涛,曹阿林. 纯铝材在硫酸中恒流阳极氧化机理初探[J]. 材料保护, 2009, 42(3)
作者姓名:张胜涛  曹阿林
作者单位:重庆大学化学化工学院,重庆,400030;重庆大学化学化工学院,重庆,400030
摘    要:为研究铝阳极氧化膜氧化生成机理,采用恒流电解法,对铝试样在硫酸中的阳极氧化过程进行了研究.通过对铝阳极氧化时的阳极氧化电位-时间关系分析发现,阳极氧化电位出现规则的阶跃现象,其阶跃电位为0.039 0 V,根据其氧化电流密度-时间曲线计算出阳极氧化膜的孔隙率为0.1.结果分析表明,氧化电位阶跃与阻挡层厚度的增加密切相关,氧化电位的阶跃主要是由于阻挡层的增厚引起的,阻挡层首先在孔隙面积上生成,当厚度每增加1.530×10-8cm时,发生铺展作用.

关 键 词:纯铝材  阳极氧化  硫酸  恒电流  阻挡层  电位阶跃  机理

Primary Study of the Mechanism for Constant-Current Anodizing of Aluminum in Sulfuric Acid
ZHANG Sheng-tao,CAO A-lin. Primary Study of the Mechanism for Constant-Current Anodizing of Aluminum in Sulfuric Acid[J]. Journal of Materials Protection, 2009, 42(3)
Authors:ZHANG Sheng-tao  CAO A-lin
Affiliation:ZHANG Sheng-tao,CAO A-lin ( College of Chemistry , Chemical Engineering,Chongqing University,Chongqing 400044,China)
Abstract:The anodic oxidation process of aluminum in sulfuric acid has been investigated at constant current. The mechanism for the for-mation of anodic oxidation coating on Al was primarily studied,and the anodizing potential-time relation of Al was analyzed. Re-sults indicate that the potential -time relation of Al anodizing in sulfuric acid was dominated by regular stepped potential,and the regular stepped potential was measured as 0.039 V. Using anodi-zing current density -time curve,the porosity of the anodizin...
Keywords:Al  anodizing  sulfuric acid  constant current  barri-er layer  regular stepped potential  mechanism  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号