首页 | 本学科首页   官方微博 | 高级检索  
     

基于FWD的沥青路面罩面设计方法的探讨
引用本文:费飞,孔永健. 基于FWD的沥青路面罩面设计方法的探讨[J]. 黑龙江工程学院学报, 2007, 21(1): 17-21
作者姓名:费飞  孔永健
作者单位:[1]北京国投公路建设发展有限公司,北京100027 [2]北京交通大学土木建筑工程学院,北京100044
摘    要:落锤式弯沉仪(FWD)作为一种快速测试仪器,如何合理利用其所测数据来评定路面的剩余寿命,从而确定路面的罩面厚度,是道路研究的一个重要课题.文中提出应用FWD所测弯沉数据,通过利用反算模量来进行罩面厚度的设计方法.在力学模型与破坏准则的选取上借鉴路面力学分析中较合理的方法,提出一种基于FWD的力学经验设计方法.

关 键 词:FWD  罩面  应力应变  BB  模量反算  沥青路面  罩面厚度  经验设计方法  asphalt pavement  overlay  method of  力学分析  选取  破坏准则  力学模型  反算模量  落锤式弯沉仪  应用  课题  道路研究  剩余寿命  数据  利用  测试仪器  快速
文章编号:24052555
修稿时间:2006-04-12

The design method of overlay of the asphalt pavement using FWD
FEI Fei,KONG Yong-jian. The design method of overlay of the asphalt pavement using FWD[J]. Journal of Heilongjiang Institute of Technology, 2007, 21(1): 17-21
Authors:FEI Fei  KONG Yong-jian
Affiliation:1. Beijing International trust and investment highway construction and development Co. Ltd, Beijing 100027, China; 2. School of Civil Engineering and Architecture, Beijing Jiaotong University,Beijing 100044,China
Abstract:How to reasonably use the data tested from FWD to predict the remaining life of pavement, even to design the width of the overlay, is an important and difficult research project in road engineering. In this article, an ideal that based on the moduli backcalculated from deflection data of FWD was put forward in overlay thickness design method. A new mechanistic-empirical procedure based on FWD is developed in this paper according to the information from the other country and our own. The choices of mechanistic model and damage model of this method take advantage of the reasonable method in the analysis of mechanics of the pavement.
Keywords:FWD   overlay   stress and strain   BB   backcalculated moduli
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号