| 利用余料脱离流道的结构设计 |
| |
| 引用本文： | 章建军,扬程,刘晓燕,王耀宁,刘晓平.利用余料脱离流道的结构设计[J].模具工业,2009,35(10):64-65. |
| |
| 作者姓名： | 章建军 扬程 刘晓燕 王耀宁 刘晓平 |
| |
| 作者单位： | 西安建筑科技大学冶金工程学院,陕西西安,710055 |
| |
| 摘 要： | 设计了一种利用余料脱离流道的结构,利用流道余料做出挂台,只用很少的塑料就可以省略侧向凹槽或球形拉杆,只需拉板动作,流道即可自动脱离,安全可靠,提高了工效。
|
| 关 键 词： | 三板式注射模 拉板 余料 |
Structural design of stripping of residual material from flow channels |
| |
| ZHANG Jian-jun,YANG Cheng,LIU Xiao-yan,WANG Yao-ning,LIU Xiao-ping.Structural design of stripping of residual material from flow channels[J].Die & Mould Industry,2009,35(10):64-65. |
| |
| Authors: | ZHANG Jian-jun YANG Cheng LIU Xiao-yan WANG Yao-ning LIU Xiao-ping |
| |
| Affiliation: | (School of Metallurgical Engineering, Xi＇an University of Architecture and Technology, Xi＇ an, Shaanxi 710055, China) |
| |
| Abstract: | Lateral grooves or ball tie-rods are usually used for the separation of plastic works from flow channel when an injection mould with three-plate construction is opened. Manually operation or draw plate may be used for the pull off of flow channel. To simplify it, a boss formed from residual material in flow channels was designed in which the flow channel can fall off automatically with the action of draw plate. The mechanism is safe and reliable and can enhance the work efficiency. |
| |
| Keywords: | 3-plate injection mould draw plate residual material |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
