| 快速堵漏胶研制 |
| |
| 引用本文： | 李冰,宫晋英. 快速堵漏胶研制[J]. 天津化工, 2010, 24(5): 33-34. DOI: 10.3969/j.issn.1008-1267.2010.05.011 |
| |
| 作者姓名： | 李冰 宫晋英 |
| |
| 作者单位： | 太原工业学院化学与化工系,山西,太原,030008 |
| |
| 摘 要： | 本试验以E-44型环氧树脂为基料,选择不同固化剂、促进剂、填料等,并进行各种组合及配比试验。所制备的快速堵漏胶,可在室温下于1min左右凝胶,在3min内达到初始固化。该堵漏胶具有较高的固化强度,适用于一般和紧急状态下金属及水泥管道、设备的堵漏。
|
| 关 键 词： | 环氧树脂 固化 堵漏胶 |
Development of Rapid Plugging Glue |
| |
| LI Bing,GONG Jin-ying. Development of Rapid Plugging Glue[J]. Tianjin Chemical Industry, 2010, 24(5): 33-34. DOI: 10.3969/j.issn.1008-1267.2010.05.011 |
| |
| Authors: | LI Bing GONG Jin-ying |
| |
| Affiliation: | (Department of Chemistry and Chemical Engineering,Taiyuan Institute of Technology,Taiyuan 030008) |
| |
| Abstract: | The present test was carried out by selecting different curing agent,accelerator,filler,etc.and combining them in different ratio,using E-44 type epoxy resin as base material.The rapid plugging glue prepared can gel in one minute or so and solidify basically in three minutes,at room temperature.The plugging glue has a higher curing intensity,and it is applied to the plugging of pipeline or equipment made from metal or cement,usually or urgently. |
| |
| Keywords: | epoxy resin solidification plugging glue |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
