| 摆动车身车辆越障过程模型及所需最小驱动力矩 |
| |
| 引用本文： | 魏巍,刘昕晖,姚亮,赵丰.摆动车身车辆越障过程模型及所需最小驱动力矩[J].吉林大学学报(工学版),2012,42(2):285-291. |
| |
| 作者姓名： | 魏巍 刘昕晖 姚亮 赵丰 |
| |
| 作者单位： | 1. 吉林大学机械科学与工程学院,长春,130022
2. 吉林大学汽车仿真与控制国家重点实验室,长春,130022 |
| |
| 基金项目： | “863”国家高技术研究发展计划项目 |
| |
| 摘 要： | 为了研究具有摆动式车身车辆的越障性能,根据其结构特点建立了单侧车轮越障和两前轮同时越障过程的普遍动力学模型,通过简化给出了2DOF铰接车在越障极限位置时的动力学模型。根据该模型能够计算出满足附着条件下各个驱动车轮的可行输出转矩。经进一步分析求出了越障所需的最小驱动力矩。并利用ADAMS对2DOF铰接车越障过程进行仿真,证明了所提方法的可靠性。
|
| 关 键 词： | 车辆工程 2DOF铰接车辆 越障 最小驱动力矩 |
Obstacle-climbing model of wheeled vehicle with oscillating body and minimum driving torque |
| |
| WEI Wei,LIU Xin-hui,YAO Liang,ZHAO Feng.Obstacle-climbing model of wheeled vehicle with oscillating body and minimum driving torque[J].Journal of Jilin University:Eng and Technol Ed,2012,42(2):285-291. |
| |
| Authors: | WEI Wei LIU Xin-hui YAO Liang ZHAO Feng |
| |
| Affiliation: | 1(1.College of Mechanical Science and Engineering,Jilin University,Changchun 130022,China;2.State Key Laboratory of Automotive Simulation and Control,Jilin University,Changchun 130022,China) |
| |
| Abstract: | To study the obstacle-climbing capability of wheeled vehicle with oscillating body,the general dynamic equations to climb over obstacle by single front wheel and by two front wheels are derived based on the vehicle structural characteristics.By simplification,the dynamic model of obstacle-climbing in limited position of a 2DOF hinge vehicle is deduced.According to the mechanics model of obstacle-climbing,the feasible driving torque of each wheel is calculated,which satisfies the ground attachment condition.By further analysis,the minimum feasible total driving torque to climb the obstacle is also calculated.Simulation of 2DOF hinge vehicle using ADAMS demonstrates the reliability of the proposed method. |
| |
| Keywords: | vehicle engineering 2DOF articulated vehicle climbing obstacle minimum driving torque |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
