| 1600kt/a铜冶炼烟气制酸装置介绍 |
| |
| 引用本文： | 肖万平.1600kt/a铜冶炼烟气制酸装置介绍[J].硫酸工业,2014(3):5-8. |
| |
| 作者姓名： | 肖万平 |
| |
| 作者单位： | 中国恩菲工程技术有限公司,北京100038 |
| |
| 摘 要： | 介绍了某有色冶炼项目1 600 kt/a硫酸装置的工艺流程、主要设备、设计特点及主要技术经济参数。制酸采用绝热蒸发、稀酸洗涤净化、预转化+"3+2"二转二吸工艺。尾气采用离子液吸附、解吸脱硫工艺,副产高浓度的SO2气体。装置充分合理利用低温位热能和高温位热能,循环水量和用电量明显降低,硫利用率达98.9%,尾气排放ρ(SO2)≤150 mg/m3。
|
| 关 键 词： | 冶炼烟气 硫酸生产 设计 高浓度 预转化 低温位热回收 |
Introduction of a 1 600 kt/a sulphuric acid plant based on copper swelter off-gas |
| |
| XIAO Wanping.Introduction of a 1 600 kt/a sulphuric acid plant based on copper swelter off-gas[J].Sulphuric Acid Industry,2014(3):5-8. |
| |
| Authors: | XIAO Wanping |
| |
| Affiliation: | XIAO Wanping (China ENFI Engineering Technology Co. , Ltd.,Beijing, 100038, China) |
| |
| Abstract: | Process flow, main equipment, design characteristics and main technical and economic parameters of a 1 600 t/a sulphuric acid plant based on off-gas are discussed in detail. Process of adiabatic evaporation, dilute acid-scrubbing cleaning and pre-conversion plus double conversion double absorption is used in sulphuric acid production. Process of absorption and desorption of ionic liquids is used in tail gas desulphurization system with high concentration of S02 as by-product. Water recireulation rate and electricity consumption are obviously reduced by rational use of low-level and high-level energy with sulphur utilization of 98.9% and S02 concentration less than 150 mg/m3 in discharged gas. |
| |
| Keywords: | metallurgical flue gases sulphuric acid production design high concentration pre-conversion low-level energy recovery |
| 本文献已被 CNKI 维普 等数据库收录！ |
