首页 | 本学科首页   官方微博 | 高级检索  
     

柔性框架式蠕动机构运动时的负位移现象
引用本文:李翠红,孟永钢,田煜,叶子申,温诗铸. 柔性框架式蠕动机构运动时的负位移现象[J]. 机械设计与研究, 2006, 22(1): 56-59
作者姓名:李翠红  孟永钢  田煜  叶子申  温诗铸
作者单位:清华大学,摩擦学国家重点实验室,北京,100084
摘    要:基于尺蠖运动原理,以压电陶瓷作为驱动和钳位元件,研制了柔性框架式蠕动机构。在计算机控制下,对其步进性能进行了测试,首先对比了六步和四步模式运动的效果,对机构运动中出现的负位移现象进行了深入分析;继而在四步模式下,研究了钳位电压和驱动电压对机构负位移的影响。研究结果对提高该进给机构的运动速度、运动精度有一定的指导意义。

关 键 词:柔性框架  蠕动机构  步进模式  压电
文章编号:1006-2343(2006)01-056-04
收稿时间:2005-04-25
修稿时间:2005-04-25

Recession Phenomenon in the Movement of the Flexible Frame Inchworm Mechanism
LI Cui-hong,MENG Yong-gang,TIAN Yu,YE Zi-shen,WEN Shi-zhu. Recession Phenomenon in the Movement of the Flexible Frame Inchworm Mechanism[J]. Machine Design and Research, 2006, 22(1): 56-59
Authors:LI Cui-hong  MENG Yong-gang  TIAN Yu  YE Zi-shen  WEN Shi-zhu
Affiliation:State Key Laboratory of Tribology, Tsinghua University, Beingjing, 100084, China
Abstract:A type of inchworm system utilized piezo-electric ceramics embedded in a flexible frame as driving and clamping units was developed.Its stepping performance was tested under control of a computer.The movements of the system in the six-step and the four-step modes were compared and the recession phenomenon was discussed in detail.The influences of the clamping and driving voltages on the recession displacement were studied.These results are valuable to improve the moving velocity and positioning accuracy of this type inchworm mechanism.
Keywords:flexible frame  inchworm mechanism  stepping mode  pizeo-electric
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号