首页 | 本学科首页   官方微博 | 高级检索  
     

复合多晶硅栅LDMOS的设计
引用本文:刘琦,柯导明,陈军宁,高珊,刘磊.复合多晶硅栅LDMOS的设计[J].微电子学,2006,36(6):810-813.
作者姓名:刘琦  柯导明  陈军宁  高珊  刘磊
作者单位:安徽大学,微电子系,安徽,合肥,230039
基金项目:国家自然科学基金;安徽省自然科学基金;安徽省高等学校青年科研基金
摘    要:提出了一种应用于射频领域的复合多晶硅栅LDMOS结构,并提出了具体的工艺实现方法。此结构采用栅工程的概念,设计的栅由S-gate和D-gate两块并列组成,S-gate用高功函数P型多晶硅材料,D-gate用低功函数N型多晶硅材料。MEDICI模拟结果表明,该结构能够降低沟道末端和漏极附近的最高电场强度,提高器件的跨导和截止频率;同时,还能够提高器件的击穿电压,并减小器件的热载流子效应。

关 键 词:复合栅  跨导  截止频率  功函数  LDMOS  热载流子效应
文章编号:1004-3365(2006)06-0810-04
收稿时间:2006-04-04
修稿时间:2006-04-042006-07-12

Design of a Dual-Material Gate LDMOS
LIU Qi,KE Dao-ming,CHEN Jun-ning,GAO Shan,LIU Lei.Design of a Dual-Material Gate LDMOS[J].Microelectronics,2006,36(6):810-813.
Authors:LIU Qi  KE Dao-ming  CHEN Jun-ning  GAO Shan  LIU Lei
Affiliation:Dept. of Microelectronics, Anhui University, Hefei, Anhui 230039, P. R, China
Abstract:A novel dual-material gate LDMOSFET(DMG-LDMOS) structure for RF application is proposed,(along) with its process technology.Using the concept of gate engineering,the gate of the DMG-LDMOS consists of S-gate(the first gate approaching source with high work-function material p~ polysilicon) and D-gate(the second gate approaching drain with low work-function material n~ polysilicon).MEDICI simulation shows that the DMG-LDMOS can reduce the peak electric field at the end of the channel and around the drain,and improve transconductance and cutoff frequency of the device.Meanwhile,this structure can increase breakdown voltage of the device and reduce its hot carrier effect.
Keywords:Dual-material gate  Transconductance  Cutoff frequency  Work-function  LDMOS  Hotcarrier effect
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号