Modeling of methane fed solid oxide fuel cells: Comparison between proton conducting electrolyte and oxygen ion conducting electrolyte

An electrochemical model was developed to study the methane (CH₄) fed solid oxide fuel cell (SOFC) using proton conducting electrolyte (SOFC-H) and oxygen ion conducting electrolyte (SOFC-O). Both the internal methane steam reforming (MSR) and water gas shift (WGS) reactions are considered in the model. Previous study has shown that the CH₄ fed SOFC-H had significantly better performance than the SOFC-O. However, the present study reveals that the actual performance of the CH₄ fed SOFC-H is considerably lower than the SOFC-O, partly due to higher ohmic overpotential of SOFC-H. It is also found that the CH₄ fed SOFC-H has considerably higher cathode concentration overpotential and lower anode concentration overpotential than the SOFC-O. The anode concentration overpotentials of the CH₄ fed SOFC-H and SOFC-O are found to decrease with increasing temperature, which is different from previous analyses on the H₂ fed SOFC. Therefore, high temperature is desirable for increasing the potential of the CH₄ fed SOFC. It is also found that there exist optimal electrode porosities that minimize the electrode total overpotentials. The analyses provided in this paper signify the difference between the CH₄ fed SOFC-H and SOFC-O. The model developed in this paper can be extended to 2D or 3D models to study the performance of practical SOFC systems.