| 模具标准件二维图形元素库的建立方法 |
| |
| 引用本文： | 申奇志,宁爱林.模具标准件二维图形元素库的建立方法[J].模具工业,2001,1(1):6-7. |
| |
| 作者姓名： | 申奇志 宁爱林 |
| |
| 作者单位： | 邵阳高等专科学校 |
| |
| 摘 要： | 采用模具标准件图形元素库辅助绘图是模具行业提高计算机绘图速度的基本方法之一 ,对模具标准件的参数化处理会影响到图库制做的难度。详细的介绍了在AutoCAD2000中建立模具标准件二维图形元素库的具体方法与步骤 ,按照此方法 ,其他行业的设计人员也可根据自己的需要建立合适的图库文件辅助绘图。
|
| 关 键 词： | 模具标准件 图形元素库 参数化处理 |
| 修稿时间： | 2000年7月13日 |
The Construction of the 2-D Drawing Element Database of the Standard Parts of Dies and Moulds |
| |
| Shen Qizhi et al.The Construction of the 2-D Drawing Element Database of the Standard Parts of Dies and Moulds[J].Die & Mould Industry,2001,1(1):6-7. |
| |
| Authors: | Shen Qizhi |
| |
| Affiliation: | Shen Qizhi et al |
| |
| Abstract: | Adopting the drawing element database of the standard parts of dies and moulds to assist drawing is one of the basic methods to increase the computer drawing speed in the die and mould industry. The parameterized treatment on the standard parts of dies and moulds will affect the difficult degree of constructing the drawing database. A detailed introduction was made on the concrete method and procedures for constructing the 2-D drawing element database of the standard parts of dies and moulds in Auto CAD 2000. According to the method introduced, the designers of other industries could also construct their respective drawing databases to assist drawing based on their own needs. |
| |
| Keywords: | standard parts of dies and moulds drawing element database parameterized treatment |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
