| 阀芯棱边磁力研磨去毛刺工艺的研究 |
| |
| 引用本文： | 高云峰,韩秀琴.阀芯棱边磁力研磨去毛刺工艺的研究[J].哈尔滨理工大学学报,1999,4(3):37-40. |
| |
| 作者姓名： | 高云峰 韩秀琴 |
| |
| 作者单位： | 哈尔滨工业大学机电工程学院!黑龙江哈尔滨，150001 |
| |
| 摘 要： | 根据磁力研磨法的工作原理，研制了阀芯棱边毛刺实验装置，并通过实验分析了各种因素对去毛刺效率、工件表面粗糙度以及工件形状误差的影响，结果表明，利用磁力研磨法能够有效地去除芯棱边毛刺，且保持适宜的棱边圆角半径。
|
| 关 键 词： | 磁力研磨 去毛刺 阀芯棱边 航空仪表 液压伺服阀 |
Research on Magnetic Finishing Deburring Technique of Servo-Value Edges |
| |
| GAO Yun-feng, HAN Xiu-qin, YU Hong--ying..Research on Magnetic Finishing Deburring Technique of Servo-Value Edges[J].Journal of Harbin University of Science and Technology,1999,4(3):37-40. |
| |
| Authors: | GAO Yun-feng HAN Xiu-qin YU Hong--ying |
| |
| Abstract: | In view of that there exist burrs in the edges and corners of the ground servo-valve, an experimental device was designed by using magnetic finishing. Using the device, the factors that affected the deburing speed are studied and the factors affecting the surface roughness and roundness and column of workpiece are analyzed. The results show that magnetic finishing may efficiently deburr and ensure appropritate edge's radius. |
| |
| Keywords: | magnetic finishing deburring servo-valve roughness |
| 本文献已被 CNKI 维普 等数据库收录！ |
