首页 | 本学科首页   官方微博 | 高级检索  
     

治理配电网电压波动的TSC无功补偿电路设计
引用本文:朱细敏,李裕能.治理配电网电压波动的TSC无功补偿电路设计[J].高电压技术,2006,32(1):97-98,120.
作者姓名:朱细敏  李裕能
作者单位:武汉大学电气工程学院,武汉,430072
摘    要:为减小同步辐射装置负荷所致配电网络电压波动,采用晶闸管投切电容器无功补偿装置(以交流过零型固体继电器为开关)进行无功补偿。该装置以负荷侧无功电流幅值IQM为电力电容的投切判据;借助MATLAB仿真工具SIMULINK仿真补偿后的配电网络,获得IQM进而求得该网络无功补偿所需的电容量,用晶闸管投切最终网络得到所需无功功率补偿,电压的波动值控制在允许范围内。

关 键 词:零电压触发  固体继电器  投切电容量  配电网  无功补偿  电压波动
文章编号:1003-6520(2006)01-0097-02
收稿时间:2004-12-26
修稿时间:2004-12-26

Circuit Design of TSC Reactive Power Compensation for Treating Voltage Fluctuation in the Distribution Network
ZHU Ximin,LI Yuneng.Circuit Design of TSC Reactive Power Compensation for Treating Voltage Fluctuation in the Distribution Network[J].High Voltage Engineering,2006,32(1):97-98,120.
Authors:ZHU Ximin  LI Yuneng
Affiliation:School of Electrical Engineering, Wuhan University, Wuhan 430072, China
Abstract:The reactive power compensation is required to reduce the voltage fluctuation of distribution network resulted from the surge load of Synchronous Radiation Facility power supply system,.The Thyristor Switching Capacitor(TSC) reactive power compensation facility is introduced,which uses alternating zero-voltage-crossing Solid State Relay(SSR) as its switch,and adopts the var current amplitude of the load as the criterion to switch on or off the capacitor.The var current amplitude of the load is obtained through a simulation tool in simulink of MATLAB,and the value of on-or-off-switch capacitor is acquired,which will realize the reactive power compensation in this network.Because the network reactive power is compensated,the voltage fluctuation value of the distribution network can be controlled in the permitted standard.
Keywords:voltage-zero triggering  solid state relay  on-oroff-switch value of capacitor  distribution network  reactive power compensation  voltage fluctuation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号