首页 | 本学科首页   官方微博 | 高级检索  
     

基于TIA/EIA-899标准的TYPE-I型M-LVDS接收器设计
引用本文:李智,陈迪平,赵建中,曹成成.基于TIA/EIA-899标准的TYPE-I型M-LVDS接收器设计[J].计算机工程与科学,2015,37(3):452-456.
作者姓名:李智  陈迪平  赵建中  曹成成
作者单位:(1.湖南大学物理与微电子科学学院, 湖南 长沙 410082;2.中国科学院微电子研究所,北京 100029)
基金项目:湖南省工业支撑项目(2013GK3019)
摘    要:提出了一种基于TIA/EIA-899标准的TYPE-I型M-LVDS接收芯片的实现方案,设计了一种新颖的共模搬移电路在实现超越电源电压轨的共模输入范围的同时简化了后级电路设计,节约了面积和功耗,电路中预放大器将输入信号放大一定倍数,迟滞比较器为系统引入迟滞效果。芯片采用GSMC0.18μm 1P6M CMOS工艺流片验证。测试结果表明,该芯片共模输入范围为-1.4V~3.8V,信号传输速率大于250 Mbps,具有典型值为28mV的迟滞效果。

关 键 词:M-LVDS  高速接口  共模电压  迟滞
收稿时间:2014-01-07
修稿时间:2014-03-17

Design of a TYPE-I M-LVDS receiver IC based on TIA/EIA-899 standard
LI Zhi,CHEN Di ping,ZHAO Jian zhong,Cao Cheng cheng.Design of a TYPE-I M-LVDS receiver IC based on TIA/EIA-899 standard[J].Computer Engineering & Science,2015,37(3):452-456.
Authors:LI Zhi  CHEN Di ping  ZHAO Jian zhong  Cao Cheng cheng
Affiliation:(1.School of Physics and Electronics,Hunan University,Changsha 410082; 2.Institute of Microelectronics,Chinese Academy of Sciences,Beijing 100029,China)
Abstract:We propose an implementation scheme for a TYPE-I M-LVDS receiver based on TIA/EIA-899 standard.A novel common-mode voltage shift circuit is designed to realize an input common-mode range that is beyond the rail of the power voltage,which can simplify the post stage circuit,thus saving area and power consumption.The pre-amplifier in the receiver can provide a fixed magnification for input signals,and the hysteresis comparator brings hysteresis effect to the system.The chip is fabricated in GSMC 0.18 μm 1P6M CMOS technology,and the test results indicate that the receiver has an input common mod range of -1.4 V~3.8 V,a signaling rate greater than 250 Mbps,and a typical hysteresis voltage is 28 mV.
Keywords:M-LVDS  high-speed interface  common-mode voltage  hysteresis
本文献已被 CNKI 等数据库收录!
点击此处可从《计算机工程与科学》浏览原始摘要信息
点击此处可从《计算机工程与科学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号